Sujihiki vs yanagiba: which slicing knife should I choose?

Short answer: Sujihiki vs yanagiba comes down to the bevel. A sujihiki is a long, double-bevel slicer that carves roasts, brisket and ham as well as slicing fish; a yanagiba is a single-bevel Japanese sashimi knife that gives the cleanest cut through raw fish but takes more skill to use and sharpen. For most home cooks, a 240mm sujihiki is the more versatile choice.

Key takeaways

  • A sujihiki is sharpened on both sides, so it works in either hand and is sharpened like a gyuto: think of it as the Japanese equivalent of a carving knife.
  • A yanagiba is sharpened on one side, with a flat or slightly hollow back. It slices raw fish in one long pull and must match the hand you cut with.
  • Choose a yanagiba if sashimi is the main event; choose a sujihiki if you’ll also carve cooked meat.
  • 240mm suits most home kitchens; 270mm helps with brisket, large joints and whole sides of salmon; professional sashimi knives are often 270–330mm.
  • Neither is for bones, frozen food or chopping.

Sujihiki vs yanagiba: what’s the difference?

Both are long, narrow slicing knives designed to finish each cut in one stroke, so food is sliced cleanly rather than sawn. The key difference is the edge: a sujihiki is double-bevel, like a Western carving knife, while a yanagiba is single-bevel, like most traditional Japanese knives.

Feature Sujihiki Yanagiba
Name 筋引, roughly “sinew slicer” 柳刃, “willow blade”
Edge Double-bevel: sharpened on both sides Single-bevel: one side ground, the back flat or slightly hollow
Designed for Carving and slicing meat; also slices and portions fish Slicing raw fish for sashimi and nigiri
Usual length About 240–300mm, though shorter and longer ones exist About 270–330mm for professionals; 210–240mm is common at home
How it cuts Long, smooth slicing strokes One long pull from heel to tip
Handedness Works in either hand Made in right- or left-handed versions
Sharpening Like any double-bevel knife Single-bevel technique; the back must stay flat
Learning curve Low Higher

What is a sujihiki?

A sujihiki (筋引) is a long, narrow, double-bevel slicing knife. Tojiro describes its own as a narrow-profile knife for cutting along the sinew of large blocks of meat, and notes that it can also be used in place of a sashimi knife. Wikipedia describes it as roughly equivalent to a Western carving knife, used to cut meat with long draw cuts.

Because it is sharpened on both sides, a sujihiki cuts straight, works in either hand and is sharpened exactly like a gyuto. Use it to:

  • carve roast beef, lamb, pork and turkey, and slice ham;
  • slice brisket and other slow-cooked joints in long, even strokes;
  • trim sinew, fat and silverskin from large joints;
  • portion and skin sides of salmon;
  • slice sashimi when you’d rather not learn single-bevel sharpening.

What is a yanagiba?

A yanagiba (柳刃, “willow blade”) is the classic Japanese sashimi knife. Kai describes it as a traditional slicing knife with a slender, one-sided, hollow-ground and relatively long blade, made for the very thin, clean cuts that sushi preparation needs. Each slice is made in one long pull from heel to tip, never sawing back and forth, so the cut surface stays smooth and glossy. The yanagiba is used for the classic sashimi cuts, including hirazukuri (thick, rectangular slices), usuzukuri (paper-thin slices) and sogizukuri (angled slices), and for skinning fillets.

A single-bevel blade is very thin right behind the edge and leaves a better surface finish, while the slightly hollow back reduces drag and stops slices sticking. The price is versatility: a yanagiba is handed, needs single-bevel sharpening, and its delicate edge should never meet bones, frozen fish or a hard board. In the Tokyo area, a square-tipped variant called the takohiki is traditional.

Which is better for sashimi?

A yanagiba, if raw fish is the reason you’re buying. Its single bevel and long blade let one pull stroke do all the work, which gives the cleanest, glossiest surface on delicate fish. A sharp sujihiki comes a close second: you’ll get neat sashimi slices with a familiar double-bevel edge, and keep a knife that can carve the Sunday roast.

For home sushi rolls you need neither; any long, sharp knife will do. See Do I need a special knife to make sushi at home?

Which is better for carving roasts and brisket?

The sujihiki, comfortably. A double-bevel edge tracks straight through a large joint, and a 270mm blade can take a brisket or a rib of beef in long, single strokes, so you aren’t sawing back and forth. A yanagiba is built for raw fish: single-bevel knives are a little thicker in the body than double-bevel ones, so a dense joint has to bend further around the blade, and the fine edge is too delicate to work around bones and hard crackling. Carve off the bone where you can, and never use either slicer to chop through bone. Our guide to the best Japanese knife for meat covers the rest of the job.

What length should I choose: 240mm, 270mm or 300mm?

  • 240mm: the most versatile home size for either knife. It suits a standard board and handles most roasts, fillets and sashimi.
  • 270mm: worth it for brisket, large joints and whole sides of salmon, where the extra reach finishes each slice in one stroke.
  • 300mm and over: mainly for professional sashimi work and large fish. You’ll need a long board and plenty of space.

In Japan, home sashimi knives tend to be 18–24cm and professional ones 27–33cm. A longer blade makes one-stroke slices easier, but it needs a longer board and a confident hand.

Can left-handed cooks use a sujihiki or a yanagiba?

A sujihiki, yes: a double-bevel sujihiki works in either hand, and Tojiro lists its own as suitable for right- and left-handed use. A yanagiba has to match your hand: single-bevel knives are ground on the right side for right-handed cooks, and left-handed versions are ground on the left. Left-handed cooks therefore need a left-handed yanagiba, so ask us about availability, and see Do you sell left-handed Japanese knives or knives suitable for left-handed users?

How do sharpening and care compare?

A sujihiki is sharpened like any double-bevel knife, on both sides at the same angle. A yanagiba is sharpened mainly on its bevelled front, with only light passes on the hollow back to remove the burr, so that the single bevel keeps working; Wikipedia notes that single-bevel knives can need more care and expertise both to use and to sharpen. Our hand-sharpening prices reflect the difference. At the time of writing (October 2026), we charge home cooks £1.35 per inch for double-bevel knives and £2.25 per inch for single-bevel knives, so a 240mm (about 9.5-inch) sujihiki costs roughly £13 and a 240mm yanagiba roughly £21. Our staff confirm the price when you hand the knife in, and the first sharpening is free on knives bought from us.

Traditional yanagiba are often carbon steel: Tojiro’s traditional range, for example, pairs a white-steel (Shirogami) core with soft-iron cladding. Carbon steel must be wiped as you work and dried straight after washing. For easier care, choose stainless steel, such as the JKC Sushi Yanagiba (MoV stainless) or a VG10-cored sujihiki like the Tojiro DP. Store either knife in a sheath for slicers and yanagiba up to 310mm or on a magnetic rack.

Which should you choose?

Browse all our sushi and fish knives.

How Japanese Knife Company can help

Hold both shapes in the knife studio at our London shops in Baker Street, Greek Street (Soho), Kensington, Chiswick and Wimbledon before you decide (shop details). All five sharpen single- and double-bevel knives by hand on whetstones, and you can also post knives to us through our sharpening and repair service. Our 2.5-hour private sushi-making class at Baker Street covers fish preparation, nigiri and maki, and you’re welcome to bring your own knives. You can add free engraving to your knife, and professional chefs can apply for our chef discount.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
24