Which Japanese knife is best for filleting fish?
Short answer: The best Japanese knife for filleting fish is the deba: a thick, single-bevel knife built to take off heads and follow the bones of whole round fish. Use a yanagiba to slice the fillets for sashimi and a flexible filleting knife for flat fish such as plaice. For a large salmon, pair a deba with a long sujihiki.
Key takeaways
- The deba is the traditional Japanese knife for breaking down whole fish. A 150–180mm deba suits most home cooks, with a small ko-deba for sardines and mackerel.
- Its thick spine and weight take off heads cleanly, and its single bevel lets the flat back ride along the frame – but it is not meant for heavy meat bones.
- A yanagiba (long and single-bevelled) is for slicing sashimi and portions, not for heads or bones.
- Flat fish fillet best with a long, flexible blade kept flat against the bones; you take four fillets from a flat fish and two from a round one.
- Most debas are carbon steel, so dry yours straight after use and oil it if it won’t be used for a while.
- Never force thin knives through bones or frozen fish: Kai says its blades are generally not suitable for bones, including fish bones, or frozen food.
What is the best Japanese knife for filleting fish of each size?
Use this table to match the knife to the fish and the job:
| Fish and task | Best knife | Why it works | From our range |
|---|---|---|---|
| Small round fish (sardines, mackerel, small trout): heading and filleting | Ko-deba, about 100–150mm | Small and nimble, but strong enough for little heads and bones | JKC Sushi Kodeba 100mm, Sakai Traditional Deba 150mm |
| Medium round fish (sea bass, bream, larger trout) | Deba, 150–180mm | Weight and thickness take off the head; the blade then follows the backbone | Sakai Traditional Deba 165/180mm, Suisin T Deba, Tojiro H Shiro Deba |
| Whole salmon and other large fish | A larger deba for the head, then a long sujihiki or filleting knife | Long strokes along the frame give a smooth fillet and make skinning easier | Sakai Traditional Deba 180mm with the Tojiro DP VG10 Slicer or Sakon 17 Layer Brown Sujihiki 240mm |
| Flat fish (plaice, sole): four fillets | Flexible filleting knife | Bends to lie flat against the bones | MAC Chef Filleting, Kai Shun Classic Flexible Filleting Knife, JKC AUS10 Flexible Boning 170mm |
| Sashimi and portioning skinless fillets | Yanagiba, 240–300mm | One long pull cut per slice leaves a clean surface | JKC Sushi Yanagiba, Sakai Traditional Yanagiba, Suisin T Yanagiba, Yasuo Black Yanagiba 210mm |
Why is the deba the traditional choice for whole fish?
The deba is the thickest Japanese kitchen knife – typically 5–7mm at the spine – and was designed to behead and fillet fish. Its weight and thickness let you remove the head cleanly, and the rest of the blade then follows the bones to lift each fillet. Like most traditional Japanese knives it has a single bevel; most are made for right-handed cooks, though left-handed versions exist.
Debas usually run from about 120mm to 210mm. The larger form is sometimes called a hon-deba, and the ko-deba, literally small deba, is lighter and more nimble for little fish; small, thin debas are also known as aji-kiri, or horse mackerel knives. Our Sakai Traditional Deba is a classic example: Shirogami No.2 carbon steel in a two-layer, single-bevel blade with a kasumi finish and a magnolia handle, in 150, 165 and 180mm. A deba copes with heads and small fish bones, but it is not meant for chopping heavy beef, lamb or pork bones. For more on the shape, see What is a deba knife used for?
How do you fillet a round fish with a deba?
In Japanese kitchens, cutting a round fish into two fillets and the frame is called sanmai oroshi (three-piece filleting), and it is the job the deba was designed for. The steps below follow the method Leiths, the London cookery school, teaches for round fish such as sea bass or mackerel, with the deba doing the heavy work:
- Scale and gut the fish first. Leiths recommends gutting before filleting, so the fillets aren’t contaminated if the knife catches the guts. If the fish was frozen, thaw it fully in the fridge before you start.
- Cut behind the head. Make an angled cut below the gill flap and fin, down to the belly, on each side. If you want the head off, a deba’s weight lets you cut through cleanly from behind the gills rather than hacking at it.
- Cut along the back. Run the knife from head to tail along the top of the dorsal fin, using the whole length of the blade rather than just the tip.
- Lift the first fillet. With long strokes, keep the blade close to the bones, ride over the top of the backbone and then over the belly bones until the fillet comes away cleanly.
- Turn and repeat. Cut along the backbone from head to tail on the second side and lift the second fillet. Leiths notes that the frame of white fish can be rinsed and kept for stock.
- Trim and pin-bone. Trim the fatty belly edge, run a fingertip down the centre of each fillet to find the pin bones, and lift them out with tweezers while supporting the flesh.
- Skin if needed. Lay the fillet skin side down, hold the tail end and work a long, thin blade such as a sujihiki or flexible filleting knife between skin and flesh.
Work on a clean, stable board and keep your knife sharp: a blunt blade tears the flesh and is more likely to slip.
When should you use a yanagiba or sujihiki instead?
Once the fish is filleted and skinned, slicing takes over. The yanagiba, literally willow blade, is a long, single-bevel knife used to cut sashimi in one long pull stroke rather than sawing. It is a slicing knife, not a filleting knife, so keep it away from heads and bones. Our JKC Sushi Yanagiba (MoV stainless, 58 ±1 HRC, in 210, 240 and 300mm) is an affordable way to start.
A sujihiki is a long, narrow slicer that is usually double-bevelled, so it is easier to sharpen than a single-bevel yanagiba and suits left- and right-handed cooks alike. It is the practical choice for skinning and portioning large salmon sides, and it slices sashimi well too. We compare the two in Sujihiki vs yanagiba: which slicing knife should I choose?
Do you need a flexible filleting knife?
For flat fish, a flexible blade makes the job much easier. Leiths recommends a very sharp knife with a long, flexible blade for flat fish, kept as flat against the bones as possible. A flat fish gives four fillets, while a round fish gives two, cut along the backbone. A flexible blade also helps when skinning fillets.
Our flexible options are the MAC Chef Filleting (160mm or 200mm), the Kai Shun Classic Flexible Filleting Knife and the JKC AUS10 Flexible Boning 170mm, which doubles as a meat boning knife. All are much thinner than a deba, so let them follow the bones rather than cut through them, and lift pin bones out with tweezers rather than the knife.
Can you fillet fish with a gyuto, santoku or petty?
Yes, for small and medium fish, as long as the blade follows the bones rather than cutting through them. A sharp gyuto will fillet mackerel, trout or sea bass, and a petty is handy for small fish such as sardines. What these thin, hard blades shouldn’t do is take off heads or chop through the backbone, because the edge can chip. If you buy whole fish more than occasionally, a deba or a small ko-deba earns its place; if you mostly buy fillets, a gyuto and a slicer are all you need.
How do you look after a carbon-steel deba?
Traditionally, debas are made of carbon steel, which needs regular care to prevent rust; stainless versions exist too. Fish is wet and often salty, so:
- rinse and dry the blade as soon as you finish, including the spine and the area by the handle;
- wipe on a thin film of camellia oil if the knife won’t be used for a day or more (see Which oil should I use on my Japanese knife?);
- expect a patina to form over time, which is normal for carbon steel;
- sharpen it as a single-bevel knife, mainly on the bevelled side, keeping the flat back flat.
Which should you choose?
- Your first fish knife: the Sakai Traditional Deba in 165mm for most fish, or 150mm if you mostly buy smaller fish. For sardines and mackerel, choose the JKC Sushi Kodeba 100mm. Other debas we stock include the Suisin T Deba and the Tojiro H Shiro Deba.
- Sashimi at home: the JKC Sushi Yanagiba in 240mm; step up to the Sakai Traditional Yanagiba or the Suisin T Yanagiba when you are ready, or choose the Yasuo Black Yanagiba 210mm for a shorter blade.
- Flat fish and skinning: the MAC Chef Filleting knife, the Kai Shun Classic Flexible Filleting Knife or the JKC AUS10 Flexible Boning 170mm.
- Large salmon sides and a double-bevel slicer: the Tojiro DP VG10 Slicer, in three sizes, or the Sakon 17 Layer Brown Sujihiki 240mm.
No single knife does every job well, but a deba plus a slicer covers most of the fish a home cook buys. See every option in our sushi and fish knives and our traditional single-bevel knives.
How Japanese Knife Company can help
If you are preparing fish for sushi, our private sushi-making class at Baker Street runs for 2.5 hours and covers fish preparation alongside sushi rice, nigiri and maki; you can bring your own knives if you like. Our knife skills classes cover grip, posture and control. Every knife bought from us comes with one complimentary sharpening; after that, we hand-sharpen single-bevel knives such as debas and yanagibas on whetstones from £2.25 per inch for domestic customers (£1.50 for professional chefs), at our five London shops or by post. Professional chefs can also apply for our chef discount.
Related questions
- Do I need a special knife to make sushi at home?
- What is a deba knife used for?
- Sujihiki vs yanagiba: which slicing knife should I choose?
- Do you sell left-handed Japanese knives or knives suitable for left-handed users?
- How do I sharpen a Japanese knife on a whetstone?
Sources
- Wikipedia – Deba bōchō
- Wikipedia – Japanese kitchen knife
- Leiths – How to fillet a flat fish
- Leiths – How to fillet a round fish
- KAI Europe – Materials & care
Reviewed by the Japanese Knife Company team, October 2026.