Who makes Japanese Knife Company’s own-brand knives?
Short answer: Suncraft, a knife maker founded in Seki, Japan, in 1948, makes several of Japanese Knife Company’s own-brand ranges: we list our JKC AUS10, JKC AUS8 and Yasuo Black knives as made by Suncraft in Seki. Our Yasuo 69 Layers knives are made in Seki and our JKC Sushi knives in Japan. For our other JKC-label ranges, such as High Carbon and Aogami, ask us about the maker.
Key takeaways
- We list our JKC AUS10, JKC AUS8 and Yasuo Black knives as made by Suncraft in Seki, Gifu Prefecture.
- Suncraft was founded in Seki in 1948 and says it plans, makes and sells its own knives and kitchen tools, including the Seseragi bread knives we stock, and also develops original products for other companies.
- Our Yasuo 69 Layers knives, listed under our JKC Original Knives, are made in Seki; our JKC Sushi knives are made in Japan.
- Our listings don’t name the maker of JKC High Carbon, JKC Aogami, JKC Limited SG2 or JKC R2 knives, so ask us if that matters to you.
- Whoever makes an own-label knife, look for a named steel and hardness, construction details and where it’s made.
Who makes Japanese Knife Company knives?
Many of the knives we sell carry their makers’ own names, from Tojiro and MAC to MIYABI and Takamura, across more than 2,000 styles of blade. Alongside them we sell our own JKC-label ranges. This is what we list for each:
| Range | Made by (as we list it) | Steel | Hardness | Construction | Shapes |
|---|---|---|---|---|---|
| JKC AUS10 | Suncraft, Seki | AUS10 | 60±1 HRC | 3 layers, full tang, stainless bolster, brown pakkawood handle | Gyuto (180/210/240mm), 165mm bunka, boning 165mm, flexible boning 170mm, Set of 2 |
| JKC AUS8 | Suncraft, Seki | AUS8 | 59±1 HRC | 3 layers, full tang | Gyuto 200mm, santoku 165mm |
| Yasuo Black | Suncraft, Seki | VG10 in 69 layers (bunka) | 61±1 HRC (bunka) | Damascus-clad, black pakkawood handle | Bunka (165/200mm), nakiri 170mm, small santoku 143mm, yanagiba 210mm |
| Yasuo 69 Layers (JKC Original Knives) | Made in Seki | VG10 core, 69-layer hammered damascus | 60±1 HRC | Damascus-clad, pakkawood handle | Gyuto (180/210mm), sets of 2 and 3 |
| JKC Sushi | Made in Japan | MoV stainless (yanagiba) | 58±1 HRC (yanagiba) | Single bevel (yanagiba) | Yanagiba (210/240/300mm), kodeba 100mm, santoku 170mm |
| JKC High Carbon, JKC Aogami, JKC Limited SG2, JKC R2 | Not named in our listings; ask us | See each product page | Including High Carbon gyuto, sujihiki and honesuki; Aogami gyuto and santoku | ||
Who is Suncraft?
Suncraft (株式会社サンクラフト) is a maker of knives and kitchen tools in Seki, Gifu Prefecture, which it calls a town of blades. It was founded in 1948 and incorporated in 1959 under its former name, Kawashima Kogyo, and its head office and factory share an address in Seki.
Suncraft says it handles planning, manufacturing and sales itself, and that, alongside its own original products, it develops original products for its business partners (OEM). Its own brands include the Seseragi bread knives we stock, such as the Suncraft Seseragi Bread Knife 210mm, and Senzo, which Suncraft describes as its mark of top-quality knives produced in-house.
Are our own-brand knives genuinely Japanese?
For the ranges in the table with a named maker or town, yes: they’re made in Japan, and the AUS and VG10 steels they use are Japanese too. AUS10 and AUS8 belong to the AUS series of stainless steels from Aichi Techno Metal Fukaumi, which lists AUS-10 at 0.95–1.10% carbon and AUS-8 at 0.70–0.80% carbon, both with 13–14.5% chromium and small additions of molybdenum and vanadium. VG10 comes from Takefu Special Steel in Echizen, Fukui Prefecture, which describes it as corrosion-resistant and easy to sharpen.
“Japanese-style” and “made in Japan” aren’t the same thing. Plenty of knives are made elsewhere in Japanese shapes or with Japanese-sounding names. That isn’t wrong in itself, but if it matters to you, look for where the knife is actually made, ideally the town or the maker, not just a mention of Japanese steel.
Seki and Sakai
Seki, in Gifu Prefecture, is where our Suncraft-made and Yasuo ranges are made. Sakai, near Osaka, is the other name you’ll often see on Japanese knives. Sakai City describes a traditional division of labour, in which smiths forge the blade, specialists sharpen it and others fit the magnolia-wood handle, and says Sakai cutlery is popular and widely respected among professional chefs.
Why do specialist retailers sell own-label knives?
Japanese knife makers don’t only sell under their own names: Suncraft, for example, says it develops original products for business partners as well as its own. For a specialist retailer, an own-label range means it can:
- choose the specification: steel, hardness, construction, handle and sizes;
- build a consistent family of shapes in one steel, such as our JKC AUS10 gyuto, bunka and boning knives;
- stand behind the knife directly, with its own advice, sharpening and aftercare.
What should you look for in an own-brand Japanese knife?
- A named steel and hardness. “AUS10, 60±1 HRC” tells you far more than “premium Japanese steel”.
- Construction details. Layers or cladding, tang and bolster: our JKC AUS10 Gyuto, for example, has three layers, a full tang and a stainless bolster.
- Where it’s made. A town or a maker, such as “made in Seki by Suncraft”, is more useful than “Japanese”.
- Realistic claims. Be wary of any knife that promises never to need sharpening.
- Aftercare. Find out who will sharpen and repair it, and what that costs.
If a listing, ours included, doesn’t name the steel grade or the maker, ask before you buy.
Which should you choose?
- Moving from a German knife: the JKC AUS10 Gyuto, around £110–£130, or the matching JKC AUS10 Set of 2.
- A full-tang knife on a budget: the JKC AUS8 Gyuto 200mm, under £90.
- Damascus looks: the Yasuo 69 Layers Gyuto, around £155–£175, or the Yasuo Black Bunka, around £165–£180.
- Sushi and sashimi at home: the JKC Sushi Yanagiba, a budget single-bevel knife.
- Carbon steel: the JKC High Carbon Gyuto, around £120–£190, or the JKC Aogami Gyuto.
Prices are at the time of writing (October 2026). To meet more of the people behind the knives we sell, see our blacksmiths’ profiles, or browse the JKC AUS10 and JKC Sushi collections.
How Japanese Knife Company can help
- Ask us: we’ve specialised in premium Japanese knives for over 27 years, and our London shops in Baker Street, Greek Street, Kensington, Chiswick and Wimbledon have a knife studio where you can try knives with guidance. Find a shop or contact us.
- Free first sharpening: every knife you buy from us comes with one complimentary sharpening; after that, our sharpening service costs £1.35 per inch for domestic double-bevel knives at the time of writing.
- Free engraving: add names, initials or a short message at checkout.
- Something special: we also offer laminated, hand-folded and bespoke blades; ask us about them.
Related questions
- Is Japanese Knife Company a legitimate retailer?
- VG10 vs AUS10: which steel is better?
- Is VG10 a good steel for kitchen knives?
- Is a hand-forged knife better than a machine-made one?
- Which Japanese knife brands are the best?
Sources
- Suncraft – 会社概要 (company overview)
- Suncraft – Homepage (planning, manufacturing and OEM)
- Aichi Techno Metal Fukaumi – High-strength stainless steel (AUS series)
- Takefu Special Steel – V Gold 10 (VG10)
- Sakai City – Cutlery
Reviewed by the Japanese Knife Company team, October 2026.