Which pans work on an induction hob?

Short answer: Pans work on induction if their base is magnetic. Good induction pans are made from cast iron (bare or enamelled), carbon steel or iron, or magnetic stainless steel, or are multi-ply or copper pans built with a magnetic steel base. Plain aluminium, copper, glass and ceramic won’t heat unless they have an induction base. The quick check: if a fridge magnet sticks firmly to the bottom of the pan, it will work.

Key takeaways

  • Induction heats the pan itself through a magnetic field, so its base must contain a magnetic (ferromagnetic) metal.
  • The magnet test works: if a magnet sticks firmly to the base, the pan is compatible.
  • Stainless steel varies: common 18/10 (type 304) stainless isn’t magnetic, so induction-ready stainless pans add a magnetic layer.
  • Copper and aluminium pans need a bonded magnetic base, as on Samuel Groves Copper Induction and Hestan CopperBond pans.
  • Choose flat-based pans that match the size of the zone, heat cast iron and enamel gently, and never heat a pan empty.

How does induction work, and why does the pan matter?

An induction hob doesn’t heat its glass top directly. A coil under the glass produces a rapidly changing magnetic field, and that field generates heat inside the base of the pan itself – but only if the base contains a ferromagnetic metal such as cast iron or a magnetic grade of stainless steel. On their own, copper and aluminium pans typically won’t heat at all.

Because the heat is made in the pan, contact matters too: heating power falls away rapidly with distance from the glass, so the base needs to sit flat.

How can you tell if a pan works on induction?

Before you replace anything, test what you already own: cast iron, carbon steel and stainless pans with a magnetic base will already work.

  1. Do the magnet test. Hold a fridge magnet against the middle of the pan’s base.
  2. Firm grip? The pan will work on induction.
  3. Weak grip, or none? A weak grip suggests the pan may heat poorly; if the magnet doesn’t stick at all, it won’t work.
  4. Test the base, not the sides. Many layered pans only have magnetic steel on the bottom.
  5. Check the label. Look for “induction” or the induction coil symbol among the maker’s heat-source icons.

What happens if you use a pan that isn’t induction-compatible?

Nothing heats. Induction hobs check for a suitable pan, and the control system won’t power the zone, or switches it off, if no compatible pan is detected or the pan is too small for the zone.

Which pan materials work on induction?

Material Works on induction? What to know
Cast iron, bare or enamelled Yes Heavy and slow to heat, but holds heat well. Heat it gradually and lift it rather than sliding it across the glass
Carbon steel and iron Yes, with a flat base Heats quickly and needs seasoning. Round-bottomed woks make little contact with a flat zone
Stainless steel Only magnetic grades, or pans with a magnetic base Common 18/10 (type 304) stainless isn’t magnetic on its own
Copper Only induction-ready pans The copper must be bonded to magnetic stainless steel; even a thin layer of copper under a steel base can stop it heating
Aluminium, including many non-stick and ceramic-coated pans Only with a magnetic base plate Check the heat-source icons for the exact model
Glass, ceramic and earthenware No Not magnetic; an interface disc will heat them, but inefficiently

Does stainless steel work on induction?

Sometimes. Stainless steel is a family of alloys, and they don’t all respond to a magnet. The 18/10 (type 304) stainless used for many cooking surfaces has essentially no magnetic response, while some 400-series grades are strongly magnetic. That’s why well-made induction-ready stainless pans combine an 18/10 cooking surface with a magnetic stainless base or outer layer.

Cristel’s Castel’Pro range, made in France, is a good example. Its professional frying pan has five layers – an induction-grade stainless steel base, then alternating aluminium and 18/10 stainless steel – and Cristel rates it for all hobs, oven-safe to 300°C and dishwasher-safe.

Does copper work on induction?

Not on its own: copper isn’t magnetic, and a layer of copper under a steel base can even shield the steel from the hob’s magnetic field. Induction-ready copper pans bond copper to magnetic stainless steel instead:

  • Samuel Groves Copper Induction has four layers – a copper exterior, an aluminium and stainless-steel core and a stainless-steel interior – finished with a stainless-steel base. Samuel Groves says it suits all hobs, including induction.
  • Hestan CopperBond wraps a 1mm pure copper core in 18/10 stainless steel, with a wrap-around stainless base, in a five-layer construction handcrafted in Italy. Hestan lists it for all cooktops, including induction.

For more on cooking with copper, see Is copper cookware worth it?

Do cast iron and enamelled cast iron work on induction?

Yes. Cast iron is strongly magnetic and works very well on induction: Le Creuset lists induction among the heat sources for its enamelled cast iron, and Unilloy’s manual approves its casseroles for induction hobs. But induction delivers heat fast, and enamel doesn’t like sudden changes:

  • Use medium heat or lower. Unilloy, the Japanese maker of our enamelled cast iron casseroles, warns that induction and halogen hobs are far more powerful than gas, so high heat can crack or damage the enamel; its manual allows induction at medium or lower.
  • Never heat an enamelled pot empty. Unilloy says this can crack the enamel and deform the pot.
  • Lift, don’t slide. Le Creuset warns that sliding cast iron across a glass hob can damage both the hob and the pan’s base.
  • Match the base to the zone. Le Creuset also notes that a pan much smaller than the cooking zone may heat poorly or not at all.

More in Is a cast iron casserole the same as a Dutch oven?

Do carbon steel pans and woks work on induction?

Yes, as long as the base is flat. Carbon steel and iron are magnetic and heat up quickly. Wahei Freiz, the Japanese maker of the eNZO range, lists its eNZO iron frying pans for both gas and induction, and its eNZO iron woks as induction-compatible too.

Round-bottomed woks are the exception: they touch a flat induction zone at a single point, so they heat poorly. If you cook on induction, choose a flat-based wok, and bring any thin pan up to temperature gradually rather than blasting it empty on the boost setting.

Do non-stick and ceramic-coated pans work on induction?

Only if they’re made for it. Many coated pans are aluminium underneath, and aluminium isn’t magnetic, so an induction version needs a magnetic plate bonded to its base. Kyocera, for example, fixes a stainless-steel plate to the underside of the ceramic-coated pans it sells in Japan as induction-compatible, and sells gas-only models alongside them; its European ceramic-coated range, aluminium with a stainless-steel base, is described as suitable for all cooking surfaces. Always check the icons for the exact pan you’re buying.

What size and shape of pan works best on induction?

  • A flat base that sits evenly on the glass.
  • The right size for the zone. Hobs have a minimum pan size, and a pan that’s too small may not be detected at all, so check your hob’s manual.
  • Well-bonded layers. Induction can make some pans hum or buzz at high power, particularly those with loose parts or poorly bonded layers; pans with solidly bonded cladding are less likely to.

Can you use non-induction pans with an adapter?

Yes. An induction interface (adapter) disc is a magnetic plate that heats up on the zone and passes the heat to the pan sitting on it. It lets you keep using a favourite copper, aluminium or glass pan, but it’s much less efficient than a pan that works on induction directly, so it’s best kept for occasional use.

Do induction pans work on gas, electric and ceramic hobs?

Usually, yes. A magnetic base doesn’t stop a pan working on other hobs, and makers generally rate induction-ready pans for every heat source. Samuel Groves describes its Copper Induction range as suitable for all hobs, Cristel rates Castel’Pro for all hobs, Unilloy approves gas, induction and electric hobs, and Le Creuset lists induction, gas, electric, ceramic and radiant hobs for its enamelled cast iron. If you’re unsure about a particular pan, check the maker’s heat-source icons.

Which induction pans do we recommend?

For more help choosing, see our cookware buying guide or browse all our cookware.

How Japanese Knife Company can help

  • Ask before you buy: call 020 7224 2422 or visit our London shops to check whether a pan suits your hob.
  • Personalise it: our cookware product pages offer free optional engraving; add it at checkout. Engraved items can’t be returned unless faulty.
  • Spread the cost: Klarna lets you pay in three interest-free instalments on website orders.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
30