MAC Professional vs MAC Chef: which MAC knife should I buy?

Short answer: With MAC knives, Chef vs Professional is mainly a choice about the bolster. The Professional series adds one, and its popular MTH-80 “Mighty” uses a 2.5mm blade of sub-zero tempered steel, so it feels weightier and more balanced. The Chef series has no bolster, and its HB-85 and TH-80 have 2.0mm blades, so they’re lighter and cheaper.

Key takeaways

  • The Professional series has a bolster, which MAC says improves weight and balance; the Chef series has none.
  • By MAC’s own figures, the Professional MTH-80 and MBK-85 chef’s knives are 2.5mm thick and weigh about 184g and 204g; the Chef HB-85 and TH-80 are 2.0mm thick and weigh about 139g and 170g.
  • MAC describes the Chef TH-80 as similar to the Professional MTH-80, but without the bolster and without the sub-zero tempered steel.
  • MAC makes its knives in Seki, Japan, with blades hand-ground and hand-sharpened on water-cooled stones to an edge of around 15 degrees per side, and quotes 57–61 HRC across its steels.
  • Choose the Professional MTH-80 for balance and edge retention, a Chef knife for lightness and value, and the Original series for the thinnest, most flexible blades.

MAC knives: Chef vs Professional at a glance

MAC makes both series in Seki, and both use thin blades (2.0–2.5mm across the two ranges, according to MAC), so both are light compared with a typical European forged knife. The differences come down to the bolster, the steel on certain models, handle height and price. You can see both line-ups in our MAC Pro and MAC Chef collections.

Feature MAC Chef series MAC Professional series
Bolster None Yes: MAC says it improves weight and balance and centres the knife in a pinch grip
Blade thickness 2.0–2.5mm (2.0mm on the HB-85 and TH-80) 2.0–2.5mm (2.5mm on the MTH-80 and MBK-85)
Steel MAC’s original molybdenum steel Original steel on most models; sub-zero tempered Superior steel on the MTH-80 and MSK-65
Handle In line with the spine Straight on most; raised for extra knuckle clearance on the MTH-80, MSK-65 and MSL-105
Feel Light and quick Weightier and more planted
Price Lower Higher

MTH-80 vs TH-80 vs MBK-85: which MAC chef’s knife is which?

MAC’s model codes confuse plenty of buyers. These are the main chef’s knives, plus the Professional santoku, using MAC’s published specifications (converted from inches and ounces, and rounded):

Model Series Blade length Thickness Weight Bolster Steel
HB-85 Chef 213mm 2.0mm 139g No Original
TH-80 (dimpled) Chef 200mm 2.0mm 170g No Original
MTH-80 (dimpled, the “Mighty”) Professional 200mm 2.5mm 184g Yes Superior, sub-zero tempered
MBK-85 Professional 216mm 2.5mm 204g Yes Original
MSK-65 santoku (dimpled) Professional 170mm 2.0mm 170g Yes Superior, sub-zero tempered

The MTH-80 is what most people mean by “the MAC Pro”. MAC calls it its most popular knife for everyday use, and it’s widely sold as the “Mighty”. Its dimples help it glide through sticky foods such as potatoes and apples. The Chef TH-80 has a similar 200mm dimpled blade without the bolster or the sub-zero tempered steel, so it’s about 14g lighter and costs less.

At 8½ inches, the shape differs too. MAC styles the Chef HB-85 as a gyuto, with a gradual taper from heel to tip, and says it is the lightest chef’s knife it makes. The Professional MBK-85 is modelled on the French chef’s knife, with a slightly curved edge and a faster taper towards the tip, which suits cooks who like to rock-chop.

Where do MAC Original and Superior fit in?

  • Original series: first created over 40 years ago as a new concept in kitchen-knife design, and the thinnest of the lot at 1.5–2.0mm. The blades are light and flexible, with a rounded tip, a raised handle for knuckle clearance and a hole for hanging. Our MAC Original collection includes the MAC Original Carving 230mm.
  • Superior series: similar designs in Superior steel, which gets an extra processing step called sub-zero tempering that MAC says improves edge retention. The blades are 2.0–2.5mm and a little stiffer than the Original. It’s the same steel the Professional MTH-80 and MSK-65 use.
  • MAC Black: our MAC Black Gyuto (180mm or 215mm) has a fluorine-coated blade, which we list at around HRC 59, and is under £100 at the time of writing.

Are MAC knives easy to look after?

Yes. MAC describes its blades as rust-resistant, high-carbon molybdenum stainless steel that stays easy to resharpen. Hand-wash and dry them, cut on a wooden or soft board such as the MAC Premium Elastomer Cutting Board, and keep them away from bones and frozen food: the Professional’s bolster adds heft, not bone-chopping strength.

Chef and Professional knives sharpen the same way. MAC says its edges are sharpened to around 30 degrees in total, or 15 degrees per side, so aim to hold a similar angle on each side when you sharpen. A 1000/6000 combination whetstone will keep either series sharp, and an angle guide helps you hold the angle while you learn. Or leave the sharpening to us.

Which MAC knife should you choose?

As a rule of thumb, if you’re coming from a heavier German knife, or you like a planted feel in a pinch grip, you’ll probably feel at home with the Professional. If you want the lightest possible knife, or two good knives for less, go Chef.

How Japanese Knife Company can help

  • Compare them in the hand: try knives, with guidance, in the knife studio at our London shops in Baker Street, Greek Street, Kensington, Chiswick and Wimbledon. Find your nearest shop.
  • Free first sharpening: every knife bought from us includes one complimentary sharpening. After that, our whetstone sharpening service costs £1.35 per inch for domestic double-bevel knives, or £1.15 for professional chefs, at the time of writing.
  • For chefs: professional chefs can apply for our chefs’ discount, with 10% refunded after verification.
  • Free engraving: add names, initials or a short message at checkout.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
24