Is Tojiro a good knife brand?

Short answer: Yes — Tojiro is a good brand one of the best-value Japanese knife makers. Founded in 1953 in Tsubame, Niigata, it makes its VG10-cored DP and Basic knives in Japan, so you get genuine Japanese steel and sharpness at a modest price. The trade-off is plain, functional finishing rather than luxury detailing.

Key takeaways

  • Tojiro Co., Ltd. was founded in May 1953 in Tsubame, Niigata, in the Tsubame-Sanjo cutlery region, and makes its knives at its Yoshida factory there.
  • Its DP and Basic knives pair a VG10 steel core with 13-chrome stainless cladding; we list both at HRC 60±1.
  • Tojiro makes both press-cut blades, cut from sheet steel for consistent quality, and traditionally forged Japanese knives.
  • The bolstered DP series received Good Design certification in 1980 and 1981 and a Long Life Design award in 1996.
  • Strengths: sharp, easy to resharpen, rust-resistant and fairly priced. Weaknesses: plainer finishing than premium brands, and a hard edge that can chip if misused.
  • Our picks: the Tojiro Basic 3 Layer VG10 Gyuto for a first knife, and the Tojiro DP VG10 Gyuto for a classic bolstered chef’s knife.

Who makes Tojiro knives, and are they made in Japan?

Tojiro knives are made by Tojiro Co., Ltd. (藤次郎株式会社) in Tsubame City, Niigata Prefecture, part of Tsubame-Sanjo, a region Nippon.com notes for producing some of Japan’s leading metalwork. The company began in May 1953 as Fujitora Nōki, making farm-machinery parts and agricultural blades, and started making fruit knives and then kitchen knives in 1955, partly because farm equipment sold poorly in winter. Fujitora Kōgyō Co., Ltd. was established in 1964 and the company took the name Tojiro Co., Ltd. in 2015, so you may still see the Fujitora name on some Tojiro-made knives.

So yes: the Tojiro knives we sell are made in Japan, not China. Manufacturing moved to Tojiro’s Yoshida factory in Tsubame in 1968, and its timeline shows steady investment there since, including a dedicated heat-treatment (quenching) plant in 1993 and NC automatic grinders with a production-management system in 2013. Tojiro is a substantial factory maker rather than a small forge: in 2017 Nippon.com reported that it made around 1,200 products, or about 3,000 including those it makes for other brands, and sold directly in 50 countries. Visitors to its Open Factory, opened in 2017, can tour the knife factory.

Are Tojiro knives handmade, forged or stamped?

Tojiro makes both. Its traditional forged knives are known in Japan as uchi-hamono; its press-cut stainless knives are nuki-hamono. Speaking to Nippon.com, Tojiro explained that for press-cut knives the blanks are cut from sheet steel with dies, which gives stable quality and efficient production, and that the craftsmen who forge its traditional Japanese knives check the fabrication and finish, which it credits for the sharpness of its press-cut knives too. Since 2008 Tojiro has also run a knife workshop where craftsmen forge blades using techniques handed down from Japanese sword-making, and its Open Factory includes a Knife Atelier.

Press-cut doesn’t mean second-rate. Steelmakers such as Takefu, which developed VG10, also produce laminated steel for knife makers, and how a knife cuts depends far more on its steel, heat treatment, grind and sharpening than on whether a hammer shaped it. We explain why in Is a hand-forged knife better than a machine-made one?

Which Tojiro ranges do we sell?

Tojiro’s catalogue is huge — its first company-run shop, the Knife Gallery, opened in 2015 with more than 900 items — but most UK cooks choose from a handful of ranges. These are the ones we stock:

Range Blade Construction Hardness (our listing) Best for
Tojiro Basic 3 Layer VG10 VG10 core, 13-chrome stainless cladding No bolster; black reinforced wood handle HRC 60±1 A first Japanese knife on a budget
Tojiro DP VG10 VG10 core, 13-chrome stainless cladding Bolster; three-rivet laminated handle HRC 60±1 Daily cooking, professional kitchens, longer blades
Tojiro Basic Damascus VG10 core, layered damascus cladding Half tang; three-rivet laminated handle HRC 61±1 The damascus look for less
Tojiro Classic Damascus Petty VG10 core, 37-layer damascus Bolster; three-rivet handle HRC 61±1 Small, precise prep work
Tojiro H Shiro Deba Shirogami (“white paper”) carbon steel Traditional single bevel Not listed Breaking down whole fish

At the time of writing (October 2026), the Basic 3 Layer knives are under £60, the Basic Damascus santoku and petty cost around £75–£105, and DP gyuto run from just over £100 (180mm) to around £240 (300mm).

We also stock the Tojiro Atelier Wenge Gyuto 210mm if you’d like to see what the maker does beyond its everyday ranges. For most home cooks, though, the DP and Basic knives are the sweet spot.

So, is Tojiro a good brand? The honest pros and cons

What Tojiro does well

  • Proper Japanese steel at an entry price. VG10 is a cobalt-bearing stainless steel developed by Takefu Special Steel. Knife Steel Nerds describes it as relatively easy to polish, so a Tojiro comes back to sharp quickly on a whetstone.
  • A hard, keen edge. At around HRC 60, the edge stays sharp for a good while between sharpenings, provided you cut on a wooden or soft board.
  • Low-fuss blades. Stainless cladding resists rust far better than carbon steel, though the knives still need hand-washing and drying.
  • Durable handles. Both ranges use tough laminated, reinforced handles, and Tojiro designed the DP’s bolstered, three-rivet construction with durability as its top priority.
  • Range and track record. In Tojiro’s catalogue the DP family runs from a 70mm peeling knife to a 330mm gyuto, and the bolstered DP series has won design awards going back to 1980.

Where Tojiro saves money

  • Functional finishing. You get a clean factory finish rather than the hand-rounded spine and choil of pricier knives. That’s a question of refinement, not build quality.
  • Plain looks. Black handles and simple blades are practical rather than beautiful; the Basic Damascus range is the exception.
  • A hard edge needs respect. Like most hard Japanese stainless, VG10 can micro-chip if you twist the blade, hit bones, cut frozen food or use glass or stone boards.

Weighing those up, Tojiro is one of the easiest Japanese brands to recommend: the steel and sharpness are the real thing, and the compromises are mostly cosmetic.

How does Tojiro compare with MAC, Shun and MIYABI?

Buyers often weigh Tojiro against these brands, all of which we stock. In short, Tojiro gives you a laminated VG10 blade for the least money; the others charge more for thinner grinds, harder steels, damascus cladding or finer finishing.

Brand (ranges we stock) Made in Blade Price at JKC (October 2026) Choose it for
Tojiro DP and Basic Tsubame, Niigata VG10 core, 13-chrome stainless cladding, HRC 60±1 Basic gyuto under £60; DP gyuto from just over £100 Value, easy sharpening, low-fuss stainless
MAC Pro and Chef Seki, Gifu MAC’s own molybdenum stainless, single layer, around HRC 60 (our listing) MAC Pro Gyuto 200mm around £190–£200 Thin, light blades with extra hand finishing
Kai Shun Classic Seki, Gifu VG-MAX core with damascus cladding, around HRC 61 (our listing) Sets around £325–£420 Damascus looks and a D-shaped handle
MIYABI 5000MCD and 4500FCD Japan (a ZWILLING brand) Powder steel (5000MCD) or FC63 steel (4500FCD) with 101-layer damascus, around HRC 63–64 Around £220–£360 per knife Very hard steels and showpiece finishes

MAC is the closest rival on everyday practicality: it makes its knives in Seki and says its blades are hand-ground and hand-sharpened on water-cooled stones, which is part of what you pay extra for. If value comes first, choose Tojiro. If you want MAC’s thinner, lighter blades, or the looks of a Shun or MIYABI, the higher price is easy to justify. Our guides to MAC Professional vs MAC Chef, whether Shun knives are worth the money and Miyabi vs Shun go into more detail.

How do you look after a Tojiro knife?

Tojiro’s own care guide is simple, and it applies to the DP and Basic alike:

  • Wash by hand with a soft sponge and washing-up liquid, rinse, wipe it and let it dry fully before you put it away. Tojiro warns against leaving knives soaking in a sink or bowl, which can cause rust and damage the handle, and against drying them in a microwave or oven. Keep them out of the dishwasher too: see Are Japanese knives dishwasher safe?
  • Rinse promptly after acidic or salty foods such as lemons and pickles, and avoid metal scourers, which scratch the blade.
  • Store it somewhere dry, not in a damp drawer or cupboard. Our guide to storing Japanese knives covers racks, blocks and sheaths.
  • Sharpen on a whetstone. Tojiro suggests holding the blade at about 10–15° to the stone, with a gap of roughly 7–10mm under the spine, and sharpening until you can feel a slight burr before turning to the other side. A 1000/6000 combination stone covers sharpening and polishing, and our guide to sharpening on a whetstone takes you through it step by step.

Which Tojiro should you choose?

How Japanese Knife Company can help

  • Try before you buy: our London shops in Baker Street, Greek Street, Kensington, Chiswick and Wimbledon have a knife studio where you can try knives, with guidance. Find your nearest shop, or read Can I try a knife before I buy it?
  • Free first sharpening: every knife bought from us includes one complimentary sharpening. After that, our whetstone sharpening and repair service costs £1.35 per inch for domestic double-bevel knives at the time of writing, in store or by post, and chip removal starts from £6.
  • Free engraving: add names, initials or a short message at checkout — a nice touch if the Tojiro is a gift.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
29