What do kurouchi, nashiji and tsuchime finishes mean?

Short answer: Kurouchi, nashiji and tsuchime are surface finishes on Japanese knife blades, not types of steel. Kurouchi is the dark, rustic surface left from forging; nashiji is a matte, speckled “pear-skin” texture; and tsuchime is a hammered, dimpled finish. In tsuchime vs nashiji vs kurouchi, the real differences are looks, scratch-hiding, a little food release and how much care the blade needs.

Key takeaways

  • A finish describes the surface of the blade, not the steel inside it. The same steel can come with any finish, so choose the steel, shape and size first.
  • Kurouchi (黒打ち, “black forged”) leaves the dark forging scale on the upper blade, and only the bevel is ground. It wears with use and comes off with abrasive scourers.
  • Nashiji (梨地) is named after the skin of a pear: a matte, pebbly texture that hides small scratches. Tsuchime (槌目) means “hammer mark”: a field of shallow hammered dimples.
  • Textured finishes can help food release a little, but none of them stops food sticking altogether; the blade’s thickness and grind matter just as much.
  • Migaki (polished) and kasumi (misty) are the smoother finishes. Damascus, or suminagashi, is an etched pattern of layered steel.
  • Textured surfaces hold water and food, so wash by hand, brush the texture clean and dry the knife straight away.

Tsuchime vs nashiji vs kurouchi: what is the difference?

Japanese knife names usually describe three things: the steel (such as VG10 or Shirogami), the construction (such as three layers) and the finish. The finish is the treatment of the flat of the blade above the edge bevel. Whatever the finish, the cutting edge itself is bare, sharpened steel.

Kurouchi, nashiji and tsuchime are the textured finishes you will meet most often. Kurouchi is the darkest and most rustic, nashiji is a fine matte texture, and tsuchime is the most visibly sculpted. The table compares them with the smoother finishes, migaki and kasumi, and with damascus.

Finish Meaning How it is made Look Food release Care
Kurouchi (黒打ち) “Black forged” Dark forging scale left unpolished on the upper blade; only the bevel is ground Matte black or charcoal, rustic, different on every blade Slight help from the texture No scourers or abrasives; wears gradually; dry well
Nashiji (梨地) “Pear skin” A fine, rough matte surface, for example blasted or polished back from a forged surface Soft, pebbly satin; hides small scratches Slight help Brush the texture clean; dry at once
Tsuchime (槌目) “Hammer mark” Dimples hammered into the outer layers, by hand or machine Rows of shallow dimples that catch the light Some help: air pockets reduce suction Brush the dimples; dry well; the texture does not wear off
Migaki (磨き) “Polished” Polished with progressively finer abrasives Satin to near-mirror sheen Least drag when slicing, but wet food can cling Shows fingerprints, water marks and scratches; no scourers
Kasumi (霞) “Mist” or “haze” Hard steel forge-welded to soft iron, then finished on stones Cloudy, misty cladding with a brighter band of steel at the edge Similar to a polished blade Soft iron rusts readily; wipe, dry and oil
Damascus / suminagashi (墨流し) “Floating ink” Layers of two or more steels forge-welded, then etched to show the pattern Waves and ripples of light and dark steel No inherent benefit Avoid abrasive cleaners, which dull the etched contrast

What is a kurouchi finish?

Kurouchi (黒打ち) translates as “black forged”. Heating and forging steel leaves a dark oxide scale on its surface. On a kurouchi knife, the maker grinds and sharpens the bevel but leaves that dark surface unpolished on the upper blade. It is a traditional blacksmith’s finish, common on hand-forged carbon steel knives in Aogami (Blue) and Shirogami (White) steel, and no two blades look quite the same.

The finish is practical as well as handsome: it hides scratches, and the forge scale is often said to give the steel beneath it a little protection. Don’t rely on that, though. The bevel and edge are bare carbon steel and rust like any other, and the scale itself is reactive and wears away gradually with use and cleaning, which many owners enjoy as part of the knife’s character.

Care is simple but specific. Wash by hand, dry straight away (the rough surface holds water), and never use scouring pads, abrasive powders or a rust eraser on the black area, or you will remove it. Our Sakamoto Santoku 165mm is a good example: a Shirogami No.2 carbon steel core in three layers with a kurouchi finish, HRC 62±1 and a magnolia handle, made in Seki, at under £70 at the time of writing (October 2026). There is also a Sakamoto Nakiri 165mm.

Not every black blade is kurouchi. The MAC Black Gyuto, for example, has a fluorine-coated blade: a factory coating rather than forge scale.

What is a nashiji finish?

Nashiji (梨地) takes its name from its resemblance to the skin of a pear, the speckled Japanese nashi pear. The word comes from Japanese lacquerwork, where it describes a ground sprinkled with gold powder; in metalwork it means a fine, matte, slightly rough surface. On a knife it looks like a soft, pebbly satin that hides small scratches, so the blade stays tidy with daily use.

Makers create it in different ways, for example by blasting the surface with a fine abrasive or by polishing back a rough forged surface without removing all of its texture. The texture gives your fingers a little grip and helps food release slightly, though less than deep hammer marks.

Like any texture, nashiji gives water more surface to cling to, so wash by hand, brush it clean under the tap and dry at once; even a stainless nashiji knife can spot if it is left to air-dry. Our nashiji knives include the Masamune Nashiji Knife Set of 5 (MoV stainless, single layer, around HRC 59; around £150 at the time of writing), the Masamune Nashiji Knife Set, and the Mac Nashiji Gyuto 200mm and Mac Nashiji Santoku 175mm.

What is a tsuchime finish?

Tsuchime (槌目) means “hammer mark”, and it is often simply called a hammered finish. Originally these were the marks left by the smith’s hammer during forging; on most modern knives they are applied deliberately for their look and feel, by hand or by machine, into the outer layers of the blade. Hand-hammered patterns are unique to each knife, while machine-applied patterns are more regular.

The dimples are partly decorative and partly practical. They trap tiny pockets of air between the blade and the food, which reduces the suction that makes slices of potato or cucumber cling, and they give your fingers some grip in a pinch grip. Knife makers such as Kai, which makes Shun, say a hammered tsuchime finish helps food release. The effect is real but modest: it won’t stop every slice sticking.

The texture is part of the steel, so it doesn’t wear off in normal use, but the dimples can hold food and water. Brush them clean under running water and dry them well; on carbon steel, the dimples darken over time. Try tsuchime with the Saku Tsuchime Santoku 170mm (under £50 at the time of writing) or the Saku Tsuchime Nakiri 170mm, or the Kiyotsu VG10 33 Layer Santoku 165mm (VG10, 33 layers, tsuchime, HRC 61±1, walnut handle). There is also a Kiyotsu VG10 33 Layer Gyuto.

What do migaki, kasumi and damascus finishes mean?

Migaki: polished

Migaki (磨き) simply means polished. It covers everything from a satin sheen to a near-mirror polish, produced by polishing with progressively finer abrasives. A smooth face slices with the least drag, which is why fine slicers are often polished, but wet or starchy food can cling to a smooth blade more than to a textured one.

Polished blades show fingerprints, water marks and scratches, so avoid scourers and buff the blade dry with a soft cloth. A true mirror polish is the most labour-intensive finish of all and the hardest to keep looking new.

Kasumi: misty

Kasumi (霞) means mist or haze. It describes the traditional look of a blade made by forge-welding hard carbon steel (hagane) to softer iron (jigane): when the blade is sharpened and finished on stones, the soft iron turns a cloudy, misty white, while the hard steel along the edge stays brighter. Kasumi is also the name for this two-material construction, as distinct from honyaki, a premium blade forged entirely from one steel; the soft iron makes kasumi knives easier to sharpen.

You will see kasumi most often on traditional single-bevel knives such as deba and yanagiba. The soft iron rusts readily, so wipe, dry and oil the blade. Our Sakai Traditional Deba is a classic example: Shirogami No.2 carbon steel in two layers, single bevel, a kasumi finish and a magnolia handle, in 150, 165 and 180mm. Browse more in our traditional single-bevel knives.

Damascus and suminagashi: layered patterns

Damascus on a modern Japanese knife is pattern-welded steel: two or more steels that etch at different rates, forge-welded together in layers and then etched so the layers show as light and dark waves. On kitchen knives it is almost always the cladding around a harder core. Japanese makers sometimes call it suminagashi, after the traditional art of floating ink on water and printing the swirling pattern onto paper or cloth.

The pattern doesn’t make the knife cut better; the core steel does the cutting. Because the pattern is revealed by etching, abrasive powders, scourers and rust erasers gradually dull its contrast. Hammered damascus combines layers with tsuchime dimples, as on our Yasuo 69 Layers Gyuto (VG10, 69 layers, HRC 60±1). The Saku 69 Layer Santoku 175mm (VG10 core, 69 layers, HRC 61–62; under £90) and the MIYABI 5000MCD (101 layers) are other examples. To check a pattern is genuine, see How can I tell if a Damascus knife is real?

Do textured finishes really stop food sticking?

A little. Tsuchime dimples and nashiji or kurouchi texture break up the film of moisture between blade and food, so thin slices release a bit more easily. But no finish stops wet, starchy food sticking every time, and claims that a finish makes food “fall off” the blade overstate it.

Blade geometry matters at least as much. A thin blade with a well-shaped grind tends to push slices away, while a thick, flat-sided blade wedges and clings whatever its surface. Technique counts too. If food release is a priority, try a few knives in person rather than choosing on finish alone.

Which knife finish is easiest to look after?

  • Easiest: stainless knives with a polished, nashiji or tsuchime finish. Wash by hand, brush any texture clean and dry.
  • A little extra care: damascus. Treat it like any stainless knife, but avoid abrasive cleaners so the pattern stays crisp.
  • Most care: kurouchi and kasumi on carbon steel or soft iron. Wipe during use, dry at once, oil before storing and expect a patina to develop. Rust spots on these finishes are best spot-treated gently, or brought to us, rather than scrubbed.

Whatever the finish, Japanese knives should never go in the dishwasher. Our care instructions cover daily cleaning, How should I clean and dry my Japanese knife after every use? goes step by step, and How do I remove rust from a Japanese knife? explains what to do if spots appear.

Which should you choose?

Choose the steel, shape and size first, then the finish. Our knife buying guide and steel chemistry guide help with the first part. Then:

  • Low-maintenance everyday knife: stainless with tsuchime or nashiji, such as the Saku Tsuchime Santoku 170mm or the Masamune Nashiji Knife Set of 5.
  • A rustic, traditional look with a carbon steel edge: kurouchi, such as the Sakamoto Santoku 165mm in Shirogami No.2.
  • A traditional single-bevel fish knife: kasumi, such as the Sakai Traditional Deba.
  • Pattern and presence: damascus, from the Yasuo 69 Layers Gyuto to the MIYABI 5000MCD (MIYABI knives are around £220–£360 each at the time of writing).
  • Long, clean slices: a slicer with a smooth finish; see our sushi and slicing knives.

You can browse every finish in our knife range and knife collections.

How Japanese Knife Company can help

Finishes are easier to judge in the hand than on a screen. Our London shops are a Hamonoya, a Japanese knife shop, with a knife studio where you can try knives with guidance, so you can compare kurouchi, nashiji, tsuchime and damascus blades side by side. You’ll find addresses and opening hours on our shops page.

Every knife bought from us comes with one complimentary sharpening. Our sharpening and repair service, at Baker Street, Greek Street, Kensington, Chiswick and Wimbledon or by post, includes rust removal from £6: the safer option for kurouchi and damascus blades you don’t want to scrub.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
29