Which Japanese knife is best for cutting meat?

Short answer: The best Japanese knife for meat is a gyuto (Japanese chef’s knife) of 210–240mm, which handles trimming, dicing and slicing raw meat. Add a sujihiki or carving knife for cooked joints and brisket, a honesuki for jointing poultry, and a heavy cleaver for anything with bones – thin Japanese blades should never chop bone.

Key takeaways

  • A 210–240mm gyuto is the most useful single knife for meat; the name literally means beef knife.
  • For cooked meat, a long sujihiki or carving knife slices roasts and brisket in single, clean strokes.
  • A honesuki is a stiff, triangular Japanese boning knife for breaking down poultry at the joints – not for cutting through bone.
  • Use a dedicated meat cleaver for bones. Kai, for example, says its blades are generally not suitable for bones or frozen food.
  • Keep raw meat and ready-to-eat food apart: use separate boards and knives, or wash them thoroughly between uses.

Which is the best Japanese knife for meat for each job?

Match the knife to the job rather than looking for one blade that does everything:

Job Best knife Why it works From our range
Trimming fat, dicing stewing beef, slicing raw steak or stir-fry strips Gyuto, 210–240mm Long edge for smooth push and pull cuts; the tip handles fine trimming Tojiro DP VG10 Gyuto, MAC Pro Gyuto 200mm
Trimming small cuts, removing sinew, scoring skin and other fiddly jobs Petty, 120–150mm Small and precise, so easier to control than a long blade for close trimming Ikkaku Petty, Tojiro Classic Damascus Petty
Carving roast beef, lamb, ham or brisket Sujihiki or carving knife, 230–300mm Long, narrow blade finishes each slice in one stroke with little drag Tojiro DP VG10 Slicer, Sakon 17 Layer Brown Sujihiki 240mm, MAC Original Carving 230mm
Jointing chicken, duck and game birds Honesuki, about 150mm Stiff triangular blade with a strong tip for joints, tendons and cartilage MAC Pro Honesuki 155mm, Misono Handmade Honesuki 150mm
Boning a leg of lamb or pork shoulder, removing silverskin Boning knife, stiff or flexible Narrow blade follows the bone and slips under membrane JKC AUS10 Boning 165mm, JKC AUS10 Flexible Boning 170mm
Chopping ribs, oxtail or chicken carcasses Meat cleaver Heavy, thick blade built for impact Suncraft Meat Cleaver
Eating steak at the table Steak knives Sharp, sturdy table knives Kai Shun Steak Knife Set

Why is a gyuto the best everyday meat knife?

The gyuto is Japan’s version of the Western chef’s knife, and its name literally means beef knife, so meat is what it was designed around. A 210mm blade suits most home kitchens; 240mm gives longer strokes for large joints if your board has room. Use long push or pull cuts rather than sawing, and let the tip do the fine work on fat and sinew.

Most Japanese gyutos have thin, hard blades – our Tojiro DP VG10 Gyuto, for example, is hardened to 60 ±1 HRC – so they glide through raw meat with little pressure, but they are slicing tools, not choppers. Browse our Japanese chef’s knives (gyuto) to compare steels, weights and handle styles.

What knife should you use for cooked meat, roasts and brisket?

Cooked meat is softer and shreds easily if you saw at it, so a long, narrow slicer that finishes each slice in one stroke gives the neatest result. The sujihiki – literally a muscle or sinew slicer – is the Japanese answer, typically 240–300mm long and much narrower than a gyuto. Slice brisket and other long-fibred cuts across the grain for tender slices, and use a carving fork or tongs to steady the joint rather than your hand. If you are deciding between a sujihiki and a yanagiba, see Sujihiki vs yanagiba: which slicing knife should I choose?

Do you need a honesuki or a boning knife?

If you buy whole chickens or game birds, a honesuki is worth having. It is a small, stiff, triangular Japanese boning knife designed for deboning poultry, with an angled tip that slips between joints and tendons. Work through the joints and cartilage rather than the bones themselves; a thicker relative, the garasuki, exists for heavier bone work.

For larger cuts, such as boning out a leg of lamb or a pork shoulder, a narrower boning knife is easier to steer along the bone. A flexible version bends to follow curves and lift silverskin, while a stiffer blade gives more control on heavier joints.

Is there a Japanese butcher’s knife?

There are a few specialist Japanese boning knives. The hone-suki (honesuki) is the small triangular knife used to debone chicken, usually 12–18cm long, with an angled tip to slip between tendons. The garasuki is a thicker version that can cut through chicken bones, and the hankotsu is a boning knife used to cut hanging meat from the bone, generally about 15cm long. For a home kitchen, a honesuki or a boning knife plus a cleaver for bones covers the same jobs.

Can a Japanese knife cut through bone?

No – and trying is a quick way to damage a good knife. Kai, for example, says its blades are generally not suitable for cutting bones, including fish bones, or frozen food. A hard, thin edge at 60 HRC or more can chip if it hits bone or is twisted in a joint.

For chopping ribs, splitting chicken carcasses or cutting oxtail, use a dedicated meat cleaver and keep your gyuto for the meat itself. If an edge does chip, it can often be repaired by regrinding – our guide to chipped knives is linked below.

What about frozen or partly frozen meat?

Treat it like bone. Kai says its blades are generally not suitable for frozen food, and a hard, thin edge can chip on it. Let meat thaw in the fridge before you cut it; if you firm meat in the freezer to slice it very thinly, take it out well before it freezes hard.

How should you handle raw and cooked meat safely?

Food Standards Scotland advises against using the same chopping board or utensils for raw meat and ready-to-eat food without washing them thoroughly in between. In practice, prepare raw meat on its own board, wash the knife in hot soapy water before it touches cooked meat or salad, and dry it straight away. Never put a Japanese knife in the dishwasher.

Which should you choose?

How Japanese Knife Company can help

Our London shops have a knife studio where you can try knives with guidance, and our knife skills classes cover grip, posture and control for slicing, dicing and chopping. Every knife you buy from us comes with one complimentary sharpening. After that, our sharpening and repair service hand-sharpens double-bevel knives on whetstones from £1.35 per inch (domestic) or £1.15 per inch for professional chefs, and chip removal and tip repairs start from £6. Professional chefs can also apply for our chef discount.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
25