Japanese Knife Buying Guide: Shapes, Steel & Size | JKC

Japanese Knife Company · The buying guide

Japanese knife
buying guide.

A better cut starts with the right choice. Find the shape, steel and feel that fit the way you cook.

JAPANESE KNIFE SPECIALISTS SINCE 1998
Shape. Steel. Size. Care. All explained.
Four Pateru Nagashi kitchen knives with patterned blades and natural wood handles on dark slate
The Pateru Nagashi collectionPrecision with purpose

The short answer

Buying your first
Japanese knife?

Start with a stainless, double-bevel gyuto around 180–210 mm, or a 165–180 mm santoku if you prefer a shorter blade. Choose a comfortable handle, leave room in your budget for a board and sharpening, and build your collection around the cooking you actually do. [1]

Research checked 16 September 202624 profiles · 58 material labels · 29 FAQsSources & methodology

Start here

The best knife is personal.

Choose by purpose first. Then decide how much care you want to give it, what feels comfortable, and what you want to spend.

Looking for a specific detail? Open the 58-label material reference, budgets by task, six starter combinations, or go to care, sharpening, the buying checklist or your questions answered.

Your personal starting point

Six questions. A clearer choice.

Get a practical recommendation for the kind of knife to explore, with advice matched to your budget, handedness and care routine.

The JKC knife finder

Made for
your kitchen.

Start with what you cook.
We’ll help with the rest.

No email. No sign-up.
Your answers stay on this page.

A good place to start

An everyday gyuto or santoku, a care routine you can keep, and a handle that feels right.

Enable JavaScript to use the personalised finder, or use the complete shape and steel comparisons below.

The finder suggests a category, not a guaranteed product match. Individual geometry, stock and specifications still matter. For a specialist or left-handed blade, ask us to confirm the exact model.

01 / Shape & purpose

24 profiles. A purpose for each.

Every knife type in this guide has its own illustration: everyday knives, small companions and specialist tools. Search by name or task, or compare all 24 below. Lengths are common shopping ranges, not rules.

24 illustrated profiles · All shown

01 / All-purpose

Gyuto

180–240 mm

Usually double bevel

The versatile main knife for mixed vegetables, boneless meat and fish. Extra length helps with larger ingredients and draw cuts.

What to check

Try 210 mm as a starting point. Edge curvature varies; match it to your cutting motion.

Reading the drawing: Pointed tip, curved front edge and a longer heel section.

Explore the range
02 / All-purpose

Santoku

165–180 mm

Usually double bevel

A compact all-rounder for mixed daily preparation. Its broad blade gives useful clearance for controlled push cuts.

What to check

Choose by balance and comfort, not hand size alone. A short blade is not automatically light.

Reading the drawing: A spine that curves down to a low tip; broad blade and flatter edge.

Explore the range
03 / All-purpose

Bunka

165–180 mm

Usually double bevel

A compact all-purpose knife whose fine angular tip is useful for scoring and detailed vegetable preparation.

What to check

The delicate tip needs a light touch. Avoid pivoting it sideways against the board.

Reading the drawing: Angular reverse-tanto tip on a compact, broad blade.

Explore the range
04 / Vegetables

Nakiri

150–180 mm

Usually double bevel

A vegetable specialist for repeated slicing and chopping. Its flatter edge suits controlled push cuts.

What to check

A thin nakiri is not a bone cleaver. Use a bench scraper to transfer chopped food.

Reading the drawing: Tall rectangular blade, rounded front corner and almost straight edge.

Explore the range
05 / All-purpose

Western-style chef’s knife

180–260 mm

Usually double bevel

An all-purpose alternative for cooks who like a curved belly and a familiar handle. Japanese-made versions also exist.

What to check

Gyuto and chef’s knife overlap as names. Compare the actual profile; nationality does not determine thickness or toughness.

Reading the drawing: A Western-style example with a pronounced belly and pointed tip.

Explore the range
06 / Small tasks

Petty

120–150 mm

Usually double bevel

A small companion for trimming fruit, preparing small ingredients and precise tip work beside your main knife.

What to check

For board work, check blade height and knuckle clearance. A shorter paring knife may suit in-hand work better.

Reading the drawing: Small pointed blade with a modest heel and gentle belly.

Explore the range
07 / Small tasks

Utility knife

130–180 mm

Usually double bevel

A medium-small blade for produce, trimming and jobs between a paring knife and your main knife.

What to check

Utility and petty are overlapping retail categories. Some utility knives are serrated; this example has a plain edge.

Reading the drawing: Narrow, medium-length pointed blade; overlaps the petty category.

Explore the range
08 / Small tasks

Straight paring knife

70–100 mm

Usually double bevel

A short knife for controlled peeling, trimming and small detail tasks. The straight blade is easy to position.

What to check

Choose a secure grip and a length you control. Low blade height can limit comfortable chopping-board use.

Reading the drawing: Short pointed blade with a straight rear edge for close control.

Explore the range
09 / Small tasks

Bird’s-beak peeling knife

50–80 mm

Usually double bevel

A curved peeler for following rounded fruit and vegetables, removing eyes and shaping small ingredients.

What to check

Its concave edge is not for general board chopping. Ask how the curved edge should be sharpened.

Reading the drawing: A downward-curving tip and concave cutting edge, like a bird’s beak.

Explore the range
10 / Carving

Sujihiki

240–300 mm

Usually double bevel

A long narrow slicer for boneless roasts, cooked meat and fish. Use a smooth draw cut for clean presentation slices.

What to check

Leave enough space for the full stroke. Do not use its fine edge to work through bones or joints.

Reading the drawing: Long narrow blade with a pointed tip and gently sweeping edge.

Explore the range
11 / Fish & sashimi

Yanagiba

240–330 mm

Traditionally single bevel

A traditional sashimi slicer for precise draw cuts through boneless fish. Its geometry rewards practiced technique.

What to check

Confirm handedness and single-bevel sharpening support. It does not replace a fish-breakdown knife.

Reading the drawing: Long willow-leaf profile and pointed tip; a bevel line is shown.

Explore the range
12 / Meat & poultry

Honesuki

145–165 mm

Often asymmetric; check model

A stiff poultry-boning knife for tracing bones, trimming and separating joints with controlled cuts.

What to check

Work around bones, not through them. The triangular silhouette does not establish the bevel or handedness.

Reading the drawing: Stiff triangular profile with a high pointed tip and deep heel.

Explore the range
13 / Fish & sashimi

Deba

150–210 mm

Traditionally single bevel

A substantial traditional knife for breaking down whole fish. Choose size and geometry to suit the fish and technique.

What to check

Get guidance on the model’s fish-bone limits. A deba is not a general meat-bone chopper.

Reading the drawing: Deep blade and substantial heel, tapering to a fish-prep tip.

Explore the range
14 / Vegetables

Chinese vegetable cleaver

180–220 mm

Usually double bevel

A broad, relatively thin slicing knife, often called chuka bocho, for vegetables and other suitable boneless prep.

What to check

Despite its size, a thin slicing cleaver must not be used for bones. Check the maker’s intended duty.

Reading the drawing: Tall rectangular slicing blade. Side view cannot establish its thickness.

Explore the range
15 / Meat & poultry

Bone cleaver

150–220 mm

Usually double bevel

A purpose-built heavier tool for bone work within the maker’s specified limits. It has different geometry from a fine slicer.

What to check

Blade thickness, construction and intended duty matter. A hanging hole or tall shape is not proof of bone capability.

Reading the drawing: Heavy-cleaver example with a broad blade and hanging hole; verify construction.

Explore the range
16 / Bread & table

Bread knife

200–270 mm

Serrated; geometry varies

A serrated knife for crusty loaves, soft bread and suitable cakes. Enough reach lets you saw without crushing the loaf.

What to check

Check the serrations, knuckle clearance and maintenance service. Avoid hard contact with a tray or worktop.

Reading the drawing: Long blade with repeated serrations along the cutting edge.

Explore the range
17 / Bread & table

Steak & table knife

90–130 mm

Plain or serrated; check model

A dining knife for portioning food on a plate. Plain-edge and serrated designs give different cutting and maintenance experiences.

What to check

The illustration shows a plain edge. Hard crockery wears edges; a table knife is not a kitchen-prep replacement.

Reading the drawing: A slim table-knife example with a pointed tip and plain edge.

Explore the range
18 / Vegetables

Usuba

165–210 mm

Traditionally single bevel

A specialist for precise vegetable work and techniques such as rotary peeling. The square Kanto profile is shown.

What to check

This is not interchangeable with a double-bevel nakiri. Regional usuba profiles vary; confirm handedness and sharpening.

Reading the drawing: Square-tipped Kanto-style vegetable blade; a single-bevel line is shown.

Search this specialist
19 / Fish & sashimi

Traditional kiritsuke

240–300 mm

Traditionally single bevel

A long specialist profile used for skilled vegetable and fish preparation. Its flat edge and fine tip need controlled technique.

What to check

Ask specifically for the traditional single-bevel construction. The name is also used for modern double-bevel knives.

Reading the drawing: Long flat-edged specialist profile with an angular tip and bevel line.

Search this specialist
20 / All-purpose

K-tip gyuto / modern kiritsuke

180–240 mm

Usually double bevel

An all-purpose gyuto-style knife with an angular tip. A practical alternative when you like this tip and its actual edge profile.

What to check

Check the belly, grind and handedness. It can look similar to a traditional kiritsuke but has a different role.

Reading the drawing: Long all-purpose profile with a k-tip and more belly than the traditional example.

Search this specialist
21 / Fish & sashimi

Takohiki / takobiki

240–330 mm

Traditionally single bevel

A narrow traditional sashimi slicer with a square tip, used for clean draw cuts through boneless fish.

What to check

Confirm the exact regional style, handedness and length. Its square tip is not for chopping or prying.

Reading the drawing: Long, narrow, straight-edged slicer with a square tip.

Search this specialist
22 / Fish & sashimi

Flexible fillet knife

150–210 mm

Usually double bevel

A narrow flexible knife for following the contours of fish during filleting and skinning when that method suits the fish.

What to check

Flexibility varies by model and cannot be established from a side-view drawing. It is a different tool from a deba.

Reading the drawing: Very narrow blade with a sweeping tip; flexibility must be checked in the specification.

Explore the range
23 / Meat & poultry

Boning / skinning knife

120–180 mm

Usually double bevel

A narrow blade for trimming and working close to bones. Curved, straight, stiff and flexible versions serve different jobs.

What to check

This illustration is a curved example. Choose stiffness and shape for the task; do not use it to cut through bones.

Reading the drawing: Narrow curved boning profile with a precise tip and deeper heel.

Explore the range
24 / Fish & sashimi

Sakimaru takohiki

270–330 mm

Traditionally single bevel

A traditional long slicer with a curved sword-like tip. An alternative sashimi profile for cooks with a specific preference.

What to check

Confirm the exact maker’s profile, handedness and sharpening method; naming and tip shapes vary.

Reading the drawing: Long slicer with a curved sword-like tip, unlike a square-tipped takohiki.

Search this specialist

Read the profile and the specification together. These are typical side-view illustrations, not scale drawings or evidence of thickness, flexibility or handedness. Regional and maker variations exist. The two cleavers and two kiritsuke examples deliberately show why appearance alone is not enough. [2][3][14][16][31][32][33]

The most useful comparison

Gyuto vs santoku. Both belong in the kitchen.

Both are all-purpose knives. The useful difference is how their length, profile and tip feel in your everyday cutting.

Choose a gyuto if…

You want
More reach for slicing and larger ingredients.
You prefer
A pointed tip and a longer working edge.
Try first
180 mm for compact control; 210 mm for a balanced starting point; 240 mm if you want more reach.
Check
The belly suits your motion. Do not force a flat profile into a high rocking action.

Choose a santoku if…

You want
A compact main knife for mixed daily prep.
You prefer
A broad blade and a relatively flat working edge.
Try first
165–180 mm, with enough height to clear your knuckles.
Check
The actual tip, handle and weight feel comfortable. A shorter blade is not automatically lighter.

Still deciding? Hold both in your normal grip. If neither feels clearly better, a stainless double-bevel version of either is a practical first purchase. You do not need both to begin.

Know what you are looking at

Read the blade, not just the label.

The thinness behind the edge, the shape of the grind and the edge profile help explain why two knives with the same steel can feel very different. [4][5]

Knife anatomy: handle at left, spine along the top, tip at right, heel at the rear of the cutting edge, and cutting edge below.HandleSpineHeelEdgeTip
Schematic illustration. Blade profiles and proportions vary by maker.
01

Profile changes the motion

A flatter edge suits push cuts; more curve allows more rocking. Keep the edge moving in its intended plane—sideways twisting can damage a fine blade.

02

Geometry changes the cut

A thin grind can pass through food with less resistance. A thicker blade may offer more support. Spine thickness alone does not describe the thinness immediately behind the edge.

03

Comfort changes everything

Feel the heel and spine where your fingers rest. Check clearance above the board and whether the balance lets you work without gripping hard.

Broad blade

Useful clearance for board work and repeated vegetable prep. Height does not establish thickness or bone-cutting ability.

Narrow blade

Useful for draw cuts, trimming and reaching around ingredients. Check whether there is enough clearance for the board work you intend.

Curved edge

A belly allows a rocking motion. Keep movement in the edge’s intended plane; avoid twisting a planted tip.

Flatter edge

A longer flat section suits push cuts and chopping. Lift and move the blade rather than forcing a high rock.

02 / Size & feel

What size knife is right for you?

Blade length is measured along the blade, not the whole knife. Your ingredients, working space and comfort are more useful guides than hand size alone.

80–100 mm · paringClose, controlled detail work
120–150 mm · pettySmall ingredients and trimming
165–180 mm · santoku / bunka / nakiriCompact board work
180–210 mm · gyutoA useful all-purpose range
240 mm · longer gyutoMore reach and a larger working area
240–300 mm · slicerLong draw cuts and larger pieces

The 30-second fit check

  • Hold it naturally. A pinch grip or handle grip should feel secure without excessive pressure.
  • Check the clearance. With the edge on the board, your knuckles should have enough room for the intended cut.
  • Try the movement. You need room for the full stroke, the ingredient and your guiding hand—not just the blade at rest.
  • Notice the balance. Blade-forward and handle-forward can both work. Neither is an objective upgrade.
  • Keep it comfortable. More length can mean fewer strokes; less can feel easier to control. There is no mandatory board-to-blade ratio.

Left-handed? Check the grind, bevel and handle together. “Double bevel” does not always mean perfectly symmetrical. [14]

Wa · traditional Japanese handle

Often wood, with an oval, octagonal or D-shaped form and a hidden tang. Many are relatively light. D-shaped handles can be handed; replaceability depends on the particular construction.

Yo · Western-style handle

Often contoured and riveted, using wood, composite or other materials. Many feel more substantial in the hand. A full tang is one construction choice, not a requirement for a good kitchen knife.

03 / Steel without the overwhelm

Stainless or carbon? Start with your routine.

Both can make excellent knives. Start with the care routine you can keep up with, then compare the finished knife’s geometry, sharpening needs and feel.

Stainless

The practical starting point for most buyers. More resistant to corrosion, but still needs hand washing and thorough drying. It is stain-resistant, not stain-proof.

Carbon

Reactive steels develop patina and can rust. Choose them if you enjoy attentive care: wipe during prep, wash and dry promptly, and follow the maker’s oiling guidance.

Stainless-clad carbon

Stainless outer layers cover much of the blade, while a reactive carbon core remains exposed at the edge. Easier to live with than fully reactive cladding, but the edge still needs care.

Care and construction: [10][12][14] “High-carbon stainless” is still stainless steel; it does not mean the same thing as a reactive carbon-steel knife.

Common Japanese knife steel names and practical buying considerations
Steel / labelFamilyWhat it means for you
AUS-8 / AUS-10Everyday stainlessPractical options for daily cooking. The maker’s heat treatment and grind matter more than the AUS number alone. [9]
VG10 / VG-MAXEveryday to premium stainlessCommon choices for a fine kitchen edge with straightforward care. VG-MAX is a maker-specific formulation; neither name guarantees a particular hardness. [19]
Ginsan / GIN 3Traditional-feeling stainlessAlso called Silver 3. A stainless option worth considering if you enjoy sharpening. Confirm the actual knife’s hardness and cladding. [8]
SG2 / R2Powder stainlessFrequently chosen for wear resistance. Allow time for sharpening and check stone compatibility. Follow the maker’s exact alloy designation; powder steel is not automatically tougher. [7]
VG1 / VG5 / VG7Other Takefu stainlessDifferent alloys, not a simple ladder from bad to good. Judge the finished blade and its care instructions rather than the number in the name. [6]
12C27 / AEB-L / Swedish stainlessOther stainless options“Swedish” describes origin, not one alloy. Ask which grade is used; these labels should not be treated as interchangeable specifications. [4]
Molybdenum-vanadium / 440-seriesBroad stainless labelsA family description is less specific than an alloy grade. Ask for the actual composition or maker specification before comparing performance. [9]
Shirogami / White #1, #2Reactive carbon steelTraditional carbon steels associated with responsive sharpening. They develop patina and can rust. White #1 and #2 are distinct grades, not quality scores. [3]
Aogami / Blue #1, #2Alloyed reactive carbonBlue steels add alloying elements to a carbon-steel base. They still need active moisture control; “Blue” does not mean stainless. [3]
Aogami SuperReactive carbon steelOften selected for a wear-resistant carbon edge. The word “Super” does not remove the need for careful technique, sharpening or drying. [4]
SKD / SLDCheck the exact specificationOften sold as semi-stainless in kitchen knives. Reactivity depends on the precise alloy and treatment; wipe and dry as you would a reactive blade. [14]
HAP40 / ZDP-189 and specialist alloysModel-specific careDo not group every high-alloy or powder steel as carefree stainless. Ask about corrosion behaviour, suitable abrasives and repair support for the specific knife. [4]

12 steel groups · Practical comparisons, not laboratory rankings.

On smaller screens, swipe the table sideways. Steel names are not proof of the quality of a finished knife; use the product’s own specification for exact hardness, origin and construction. Can’t find yours? Search the full 58-label reference below.

Go deeper: hardness, toughness and edge retention

What HRC actually tells you

Rockwell C is a hardness measurement. It does not measure sharpness, rust resistance or overall quality. The same alloy can be heat-treated to different hardness levels; compare the maker’s stated range rather than assigning one HRC to every knife made from that steel.

Why there is no universal “best steel”

Toughness is resistance to fracture; wear resistance concerns abrasion. Hardness helps resist deformation. Increasing one property can involve compromises in another. The heat treatment and blade geometry connect those properties to the cut. [4]

Lab results need context

Controlled edge-retention tests isolate variables, often using abrasive test media. They do not directly predict how long a specific knife will stay sharp in every home kitchen. Chipping, corrosion, your board and your technique also affect the edge. [5]

Powder metallurgy is a process

It can produce a fine, uniform alloy structure and enable particular compositions. It does not remove the need for a suitable grind or heat treatment. Check sharpening requirements rather than assuming every powder-steel knife behaves alike. [7]

The complete material reference

Look up the exact label on your shortlist.

58 entries explain specific grades, aliases, family labels and constructions. They are not 58 distinct steel alloys. Start with the comparison above, or search the name on a product page.

58 material labels available

Molybdenum VanadiumBroad stainless description

Names two alloying elements, not one fixed recipe. Ask for the actual grade, heat treatment and intended use before comparing knives. [3][9]

Hyper Molybdenum VanadiumMaker or range-specific label

“Hyper” is not a standardized steel grade or a measured sharpness rating. Use the specific maker’s alloy and care specification.

AUS-8Specified stainless grade

An Aichi stainless grade used in practical kitchen knives. Compare geometry and heat treatment; the name alone does not fix hardness. [9]

Swedish StainlessOrigin description

Not a single alloy. Ask which Swedish steel is used and where the finished knife was manufactured. [20][21]

Acier 12C27M12C27M stainless

“Acier” means steel. 12C27M is a distinct Alleima grade, not simply another spelling of 12C27. Follow knife care even if the alloy resists corrosion well. [20][21]

Acuto 440Verify maker specification

Do not silently substitute 440C: similar-looking names are not proof of identical composition. Request the maker’s precise grade and sharpening guidance.

440CSpecified stainless grade

A stainless alloy designation. Finished hardness and cutting behaviour depend on heat treatment and geometry, so compare the complete blade. [4]

DSR-1K6Daido stainless; DSR1K6

A manufacturer-specified martensitic stainless steel for blades. Its name should not be used as a synonym for generic “German steel”. [24]

Stainless SteelFamily label, alloy unspecified

A useful care category, but too broad for a detailed performance comparison. Ask for the grade and still wash and dry by hand. [10]

VG-10Takefu stainless; VG10

A widely used stainless cutting-core option. Different makers can produce very different knives from it; inspect grind, fit and heat treatment. [6][19]

VG MaxShun VG-MAX designation

A Shun formulation. Compare the maker’s actual knife and care instructions rather than treating the label as a universal upgrade score. [19]

VG1Takefu stainless; V Gold 1

A separate stainless grade. A lower number than VG10 does not by itself establish the quality or suitability of the finished knife. [6]

VG2Takefu stainless; V Gold 2

Check its role in the blade. It can form part of a coreless layered construction; it should not automatically be described as soft exterior cladding. [6][15]

VG-XEOSTakefu V Gold XEOS

A distinct stainless grade developed around fine structure, hardness and corrosion performance. Follow the maker’s specification; do not invent a composition or fixed HRC. [22]

AUS-10Specified stainless grade

Another Aichi stainless grade. It is an alloy choice, not a guarantee of a better knife than every AUS-8 or VG10 model. [9]

Ginsan (Silver III)GIN 3 / Silver 3 naming

A stainless family commonly called Ginsan. Confirm the product identifies the intended GIN 3 grade; the name is not a separate cutting-performance rating. [8]

Ginsan SteelCommon Ginsan label

Usually points to the Ginsan / Silver 3 family. Treat it as a naming variation to verify, not an extra independent alloy in a comparison. [8]

ATS314Verify exact product grade

Read the maker’s specification for the exact designation and heat treatment. Do not infer origin, hardness or sharpening needs from the letters alone.

S-Class StainlessBrand-specific description

A marketing or range label rather than a universally standardized alloy. Ask what the maker discloses and judge the knife’s geometry and service support.

ZA18Check maker’s ZA18 specification

Compare the actual model, heat treatment and grind. The name alone does not mean only diamond stones or extremely fine grits can sharpen it.

Aogami SuperReactive alloyed carbon

A carbon-steel choice associated with wear-resistant edges. It still needs wiping and drying; stainless cladding leaves a reactive cutting edge exposed. [4][14]

Aogami No.2Blue #2; reactive carbon

A distinct Blue steel grade. Choose for the actual knife and your willingness to manage corrosion, not for a supposed universal rank above White steel. [3][28]

Aogami No.1Blue #1; reactive carbon

A separate grade from Blue #2 and Aogami Super. The numbering is not an overall quality score. Check hardness, geometry and care for the model. [28]

Shirogami No.2White #2; reactive carbon

A traditional carbon grade often chosen by cooks who enjoy whetstone maintenance. Patina is normal, but it does not prevent rust. [3][28]

Shirogami No.1White #1; reactive carbon

A different White steel grade from #2. It can make a fine edge, but steel designation alone cannot establish sharpness or ease of use. [28][4]

Yasuki Hagane Shirogami No.2Naming variant of White #2

Yasuki/Yasugi and Hagane relate to the steel’s naming and provenance; Shirogami No.2 identifies the grade. This is not automatically a different alloy from White #2. [28]

Yasuki Shirogami 2Naming variant of White #2

Another catalogue spelling to check against the maker’s White #2 specification. Count aliases as aliases, while retaining the model’s actual provenance. [28]

High CarbonIncomplete material description

Can describe a reactive carbon steel, while “high-carbon stainless” is a different phrase. Get the precise alloy and corrosion-care instructions before buying. [3][10]

Virgin CarbonMaker-specific carbon label

Not one internationally fixed alloy recipe. Treat the blade as reactive when the maker specifies carbon steel and confirm sharpening and storage requirements.

ChromaxCheck corrosion care

Often presented as semi-stainless in kitchen knives. That term does not mean rust-proof; confirm the exact model and wipe and dry attentively. [14]

SLDTool-steel designation; check care

Often sold as semi-stainless. Ask for the exact steel and care instructions, and do not equate it automatically with every knife labelled SKD. [14]

SG2 Powdered SteelSG2 / powder stainless naming

Powder metallurgy describes how the material is produced. Assess wear resistance alongside sharpening requirements, geometry and toughness. [7][4]

R2 Powder SteelR2 designation; verify maker

Often discussed alongside SG2, but use the maker’s declared alloy rather than assuming every catalogue label is interchangeable. [4][7]

SG2SG2 / powder stainless naming

A common powder-stainless designation. The completed blade and its heat treatment determine the ownership experience. [7]

SG2 Stainless SteelSG2 naming variant

An expanded catalogue label for SG2. It is not an additional alloy simply because “stainless steel” appears in the name. [7]

SPG2 SteelTakefu Super Gold 2 naming

SPG2 is Takefu’s Super Gold 2 designation. Compare the specific knife, and retain its published name when checking specifications. [7]

SPG StrixTakefu Super Gold STRIX

A separate powder-steel offering from Takefu. Do not collapse STRIX into SG2 merely because both use the Super Gold family name. [23]

SPG2Takefu Super Gold 2 naming

Another catalogue form of SPG2. A duplicated label is not evidence of another grade or another performance tier. [7]

HAP40Powder high-speed steel; check care

Confirm corrosion behaviour, cladding and suitable abrasives for the knife. Do not assume powder steel means carefree stainless or easy repair. [4][14]

High Speed PowderProcess / family description

An incomplete alloy identity. Ask which high-speed powder steel is used; HAP40, SRS-series and other grades should not be treated as one recipe. [3][27]

ZDP-189High-alloy powder steel

Consider sharpening time, edge geometry and corrosion care together. High alloy content and high hardness are not promises of chip resistance. [4]

MC66MIYABI powder-steel designation

A manufacturer label used in specific MIYABI lines. It does not establish European steel origin or a universally identical alloy under another name. [26]

SRS15Specified powder high-speed steel

Check the exact generation and product. Related-looking SRS13 is a different designation; do not transfer one model’s steel specification to another. [27]

DamascusLayered construction / appearance

A pattern or construction description, not one alloy. In many clad knives, a separate core forms the cutting edge; check the core and outer layers. [15]

FC63 DamascusFC63 core plus Damascus cladding

ZWILLING describes FC63 as the cutting core in its Takumi example. “Damascus” describes the surrounding construction, not proof of powder metallurgy. [25]

Nickel DamascusLayered construction description

Nickel can contribute visual contrast in layered material. The label does not identify the cutting-core steel or establish better edge retention. [15]

Nickel Damascus (SG2 core)SG2 core with patterned cladding

The core designation and the exterior pattern describe different parts of the knife. Judge cutting performance and care using the whole specification. [7][15]

Coreless 70-Layer (VG10/VG2)Alternating steels without a separate core

A coreless construction can bring multiple steels to the edge. Seventy layers does not mean seventy folds, and the number alone proves neither toughness nor sharpness. [15][6]

Three-Layer SteelLaminated / san-mai construction

Usually a cutting core between two outer layers. Check whether the cladding is reactive and whether a carbon core remains exposed at the edge. [14][15]

CeramicNon-steel blade material

A corrosion-resistant alternative for suitable slicing tasks, with different damage and maintenance limits. Avoid twisting or impact and use the maker’s sharpening route. [29]

Zirconium DioxideZirconia ceramic material

Names the ceramic material rather than a steel alloy. Approved diamond sharpening tools or specialist service may be available; “impossible to sharpen” is too broad. [29]

Kigami No.2Yellow #2; confirm grade

A traditional carbon-steel label also present in the original selector. Confirm the maker’s specification and treat it as reactive; it is not a quality score. [28]

12C27Alleima stainless grade

A separately specified grade from 12C27M. Similar names and the same country of origin do not make their compositions identical. [21][20]

AEB-LFine-carbide stainless grade

A distinct alloy, not a synonym for all Swedish stainless. Fine carbide structure can support fine edges; judge the heat treatment and geometry. [4][30]

SKDIncomplete grade designation

Ask for the full grade rather than assuming SKD, SLD and Chromax are interchangeable. Follow the particular blade’s corrosion and sharpening guidance. [14]

SRS13Specified powder high-speed steel

An SRS designation used in current Hokiyama ranges. It should be distinguished from SRS15 when comparing models and generations. [27]

VG5Takefu stainless grade

A distinct V Gold designation. It is not an automatic quality step between VG1 and VG10; compare the finished knife and manufacturer specification. [6]

VG7Takefu stainless grade

Another V Gold designation that needs its own specification. Retail steel numbers do not provide a universal ranking of finished knives. [6]

For labels without a manufacturer specification here, ask JKC to confirm the exact product before relying on a steel comparison. No stock counts, fixed alloy hardness scores or laboratory ratings are inferred from retail names.

Steel chemistry: what the elements actually tell you
C

Carbon

Supports hardening and carbide formation; its effect depends on the whole composition and heat treatment.

Cr

Chromium

Chromium in the steel matrix supports corrosion resistance; some also forms carbides. Total chromium alone is not a corrosion guarantee.

Mo / W

Molybdenum / tungsten

Can contribute to hardenability and carbide behaviour. Effects depend on amount, alloy and treatment.

V

Vanadium

Can form hard carbides and influence grain control. More wear resistance can change abrasive requirements.

Co

Cobalt

Can affect heat-treatment response in some alloys. Its presence alone does not establish sharpness or quality.

Ni

Nickel

Can contribute to alloy behaviour and visible contrast in layered materials. A patterned nickel layer is not the cutting-core specification.

Chemistry describes ingredients. Heat treatment, carbide structure, grind and sharpening turn those ingredients into a working edge. Fine-carbide steels can support very keen edges; high carbide content is not a sharpness requirement. [4][6][30]

04 / Construction & finish

What is happening inside the blade?

A beautiful finish is worth enjoying. Just make sure you understand which part actually forms the cutting edge.

Simplified cross-section of a three-layer knife: a hard cutting core sits between two outer cladding layers and remains exposed at the cutting edge.Outer claddingCutting coreExposed edge
San-mai · a core with two outer layersThe core reaches the edge. The cladding may be stainless or reactive. A stainless exterior does not make a carbon cutting edge stainless. Damascus-clad blades often follow this same basic principle. [15]
Simplified diagrams compare an evenly sharpened double-bevel edge with an asymmetric traditional single-bevel edge. Not to scale.Double bevelSingle bevel
Double or single bevel?Most everyday gyutos and santokus have edges sharpened on both sides. Traditional single-bevel knives are specialised, handed tools with different geometry and sharpening needs. Some double bevels are asymmetric too. [14]

Cross-sections are explanatory schematics, not sharpening-angle instructions. Traditional single-bevel backs can also have a shallow hollow.

Damascus

Visible layered patterning. Layer count alone does not establish cutting performance.

Tsuchime

A hammered texture. Food release still depends on the whole grind and the ingredient.

Kurouchi

A dark forge-style finish. It can wear with use and does not make a reactive blade rust-proof.

Nashiji

A pear-skin texture. The finish is not a steel grade or a guarantee of food release.

Migaki

A polished finish, with sheen and scratch patterns that vary by maker. It can show wear in use.

Forged, stamped or laser-cut? The manufacturing route alone is not a quality verdict. Evaluate the final heat treatment, geometry, edge, fit and finish. Handmade character and cutting performance are related questions, not identical ones.

05 / Spend with intention

How much should you spend?

Buy the performance and feel you need, then decide how much craftsmanship and finish you want. These are useful UK shopping bands—not a ranking of cooks.

Under £100

A considered first step

Look for a well-specified everyday knife with a comfortable handle. A simple finish is fine. Prioritise one useful blade and leave room for the essentials.

£200–£400

Refine your preferences

Worth exploring when you know the geometry, balance or specialist function you want. Consider both the purchase price and the sharpening commitment.

£400+

Craft & individuality

Rarer makers, elaborate finishing and handle materials can command more. Buy for what you value; price alone cannot promise an easier cut or greater durability.

Budget for the whole setup: your knife + a suitable board + an edge guard or safe storage + a stone or sharpening service. Reuse good equipment you already own. You do not need a premium accessory collection to start.

Spend by the job, not just the price tag.

Open a task for priorities at each budget. These are decision criteria, not claims that a named collection is stocked at a fixed price. Specialist and left-handed options may fall outside your chosen band.

GyutoStart with one main blade; 180–210 mm is a useful comparison range.
Under £100

Fit, steel disclosure and sound finishing.

£100–£200

Compare blade height, grind and handle comfort.

£200–£400

Refine weight, taper and cutting geometry.

£400+

Pay for a maker or finish you can explain the value of.

Review the gyuto profile →
SantokuA 165–180 mm all-rounder can be a complete main-knife choice.
Under £100

Prioritise control and knuckle clearance.

£100–£200

Try several balances and handle shapes.

£200–£400

Consider geometry and care before decorative layers.

£400+

Treat craftsmanship as a preference, not a need.

Review the santoku profile →
BunkaChoose it for the useful tip and compact working edge.
Under £100

Do not compromise on a comfortable grip.

£100–£200

Compare tip precision and edge curvature.

£200–£400

Choose the particular grind you will use.

£400+

Buy the specialist finish or maker you value.

Review the bunka profile →
HonesukiA recurring poultry job should justify the specialist purchase.
Under £100

Ask whether a suitable option is currently available.

£100–£200

Check the bevel and intended boning technique.

£200–£400

Prioritise handedness, heel comfort and service.

£400+

A premium finish does not make bone chopping appropriate.

Review the honesuki profile →
UtilityTypically a narrow companion for smaller ingredients.
Under £100

Keep some budget for your main knife.

£100–£200

Check clearance and your preferred blade length.

£200–£400

Pay for geometry and comfort you notice in use.

£400+

Confirm the upgrade adds something useful to the pair.

Review the utility profile →
PettyChoose the exact length for trimming or close detail work.
Under £100

A simple practical companion can be enough.

£100–£200

Compare grip, height and sharpening needs.

£200–£400

Explore your preferred maker or grind.

£400+

There is no requirement to match the main knife’s price.

Review the petty profile →
SujihikiBuy for repeated boneless carving and presentation slicing.
Under £100

Confirm a suitable length exists in the current range.

£100–£200

Budget for enough reach and appropriate storage.

£200–£400

Compare thinness, balance and edge refinement.

£400+

Choose craftsmanship after verifying the slicing role.

Review the sujihiki profile →
KiritsukeFirst establish traditional single bevel or modern double bevel.
Under £100

Do not buy an unsuitable substitute just to meet a band.

£100–£200

A modern double-bevel option may suit general prep.

£200–£400

For traditional versions, check skill and handedness.

£400+

Budget for correct maintenance as well as craftsmanship.

Review the kiritsuke profile →
Explore 80 collections in JKC’s directory

A starting point for comparing current specifications. Collections can include different shapes, steels and prices: open the range, then check the exact knife. Directory links checked 16 September 2026; inclusion is not a stock or budget guarantee.

80 collections

Browse JKC’s complete collection directory →

From the JKC range

Three ways to put the advice into practice.

Real examples with different ownership choices. These are specification-based examples, not a hands-on ranking or an exhaustive shortlist.

Senzo Ginsan Santoku, showing its blade profile and handleCompact stainless

Senzo Ginsan Santoku

167 mm · Ginsan / Silver 3 · wood handle

A compact, double-bevel option to compare if you prefer a traditional handle and a stainless blade.

See current price & specification →
Yasuo 69 Layers Gyuto, showing its blade profile and handleVersatile stainless

Yasuo 69 Layers Gyuto

180 / 210 mm · VG10 · pakkawood handle

Compare its familiar riveted handle and longer working edge. Choose the length before choosing the Damascus pattern.

See current price & specification →
Pateru Aogami 2 Santoku, showing its blade profile and handleA reactive cutting edge

Pateru Aogami 2 Santoku

165 mm · Aogami 2 · stainless cladding

For someone who wants a carbon edge and will care for it. The stainless cladding does not remove the need to dry the exposed edge.

See current price & specification →

Specifications checked 16 September 2026. Prices, availability and variations can change; confirm the live product page before ordering.

Build slowly. Choose deliberately.

A small collection, with a reason for every knife.

Begin with an all-rounder. Add a different capability when you keep noticing a job your current knife does not do comfortably.

01

The Essential Pair

210 mm gyuto + 150 mm petty

A main knife for board work and a small companion for trimming. Choose a shorter paring knife instead if most of your detail work happens in the hand.

02

The Compact Duo

165–180 mm santoku + 120 mm petty

A compact setup for varied daily cooking. Check the petty’s height for board work and choose both handles for control, not matching looks.

03

The Complete Setup

210 mm gyuto + 150 mm petty + 165 mm nakiri

Add the nakiri when frequent vegetable preparation earns it a place. A bunka is an alternative compact all-rounder, with more overlap with the gyuto.

04

The Host’s Collection

240 mm gyuto + 150 mm petty + 240–270 mm sujihiki

For a cook who values a longer main blade and clean carving. Confirm space for a full slicing stroke; 210 mm remains a valid main-knife choice.

05

The Bread-Lover’s Trio

Your all-rounder + petty + bread knife

The serrated knife adds a different job: crusty loaves and delicate bread. Choose enough blade length for your usual loaf.

06

The Specialist Addition

Your everyday pair + one task-specific knife

Add a honesuki for regular poultry boning, or another specialist when you use its particular function repeatedly. Confirm technique and handedness.

06 / Keep the edge you paid for

Good care is a small daily habit.

Choose a knife whose care you can keep up with. A premium steel cannot compensate for an unsuitable board, twisting or careless storage.

Use a suitable board

Choose a stable wooden board or suitable plastic or rubber surface. Avoid glass, stone and ceramic; leave room for the ingredient, guiding hand and full stroke.

Hand-wash and dry

Use mild detergent, rinse and dry the blade and handle thoroughly. Do not use a dishwasher or leave a knife soaking in a sink.

Store the blade safely

Use a fitting guard, dry saya, block, in-drawer holder or protected magnetic rack. A loose knife in a drawer can damage its edge and injure someone.

Respect hard-food limits

Keep fine edges away from bones and frozen food. Dense squash can trap a blade too; select an appropriate tool and controlled technique.

Maintain the edge

Sharpen when cutting performance needs it. Use an appropriate stone or experienced service; rods and pull-through tools must suit the exact blade.

Do not scrape with the edge

Use a bench scraper to move food. Dragging the sharp edge sideways across a board can damage it. Keep fingers clear during transfers.

Protect reactive steel

Wipe carbon blades during prep, particularly after acidic food. After washing and drying, follow the maker’s instructions for a light food-safe protective oil.

Match the tool to the job

Work in the intended cutting plane. Do not twist, pry, hack bones or force a trapped blade. Stop and change tools or technique if the knife binds.

Never leave it wet or dirty

Even stainless can corrode if left wet or soiled. Clean promptly, dry the handle as well, and store only once both the blade and its guard are dry.

Care references: [10][11][12] Read JKC’s full care instructions.

07 / Plan for a lasting edge

Sharpening is part of ownership.

Every knife eventually needs its edge restored. Decide how you will maintain it before you buy.

Japanese Knife Company whetstone sharpening class
Learn with guidance at a Japanese Knife Company sharpening class.

At home, or in experienced hands.

A medium whetstone is a useful first tool for many kitchen knives. A professional service is an equally valid choice—especially for repairs, unusual grinds and traditional single bevels.

Coarse
~220–400

For repair or reshaping. Removes metal quickly; use with care or leave substantial damage to a professional.

Medium
~800–1,500

A practical starting range for routine sharpening. Learn a steady angle, edge formation and deburring.

Fine
~3,000+

For refinement when the task calls for it. Optional for many home cooks; a higher grit is not automatically a better kitchen edge.

Grit ratings vary by manufacturer and abrasive. Follow the knife’s original bevel and the stone maker’s instructions. [11][13]

Three things to check: the correct angle for your knife; whether your stone needs soaking or just wetting; and how to keep the stone flat. Do not assume every Japanese knife takes the same angle or every whetstone should be soaked.

Make a better-informed choice

Six shortcuts that can lead you astray.

“The hardest steel is always the best.”

Hardness is one property. Geometry, toughness, corrosion resistance and sharpening needs matter too. A knife must suit the work and the person using it.

“Carbon is always sharper.”

Both carbon and stainless steels can take fine edges. Do not buy a care routine you dislike to chase a claim the label cannot prove.

“More Damascus layers means more performance.”

Enjoy the pattern, but compare the core, heat treatment and grind. A layer count is not a cutting test.

“Any cleaver can cut bones.”

Thin vegetable cleavers and dedicated bone cleavers are different tools. A tall blade is not evidence that it can withstand heavy impact.

“Professional means expensive.”

Professional kitchens have different jobs and preferences. A high price does not establish that a knife is better suited to daily work.

“A knife set must match.”

Choose tools that complement each other. A coordinated set makes sense only when its sizes, functions and feel all work for you.

Before you buy

Take this checklist to the knife counter.

A specification is the starting point. A few practical checks help you choose a knife you will still enjoy after the first week.

My buying checklist

0 of 8 checked

Buying online or giving a gift? Check the exact size and variation, shipping conditions, age-verification requirements and the policy for engraved items. “Japanese steel” is not the same as “made in Japan.” If a detail is unclear, ask JKC before ordering.

Your questions, answered

Japanese knife buying FAQs.

Straight answers to the decisions buyers ask about most.

Choose a question to read the answer.

What is the best Japanese knife for a beginner?

A stainless, double-bevel gyuto around 180–210 mm or a santoku around 165–180 mm is a sensible starting point. Choose the length and handle you can control comfortably, then budget for a board, safe storage and sharpening. There is no single model that suits every cook.

Gyuto vs santoku: which should I buy?

Choose a gyuto if you value extra slicing length and a pointed tip; choose a santoku if you prefer a shorter, broad blade for everyday prep. Both cut vegetables, boneless meat and fish. Compare the actual edge profile: the name alone does not tell you how much the knife will rock.

Nakiri vs santoku: what is the difference?

A nakiri is a rectangular vegetable specialist. A santoku is a compact all-purpose knife with a more useful tip for mixed tasks. Start with a santoku if it will be your only main knife; add a nakiri when dedicated vegetable preparation earns it a place.

Are Japanese knives better than German knives?

They offer different design choices. Many Japanese knives favour thinner geometry and harder edges; many German-style knives favour more substantial construction. There are exceptions on both sides. Compare the individual knife, your technique and intended tasks rather than nationality alone.

Is carbon steel sharper than stainless steel?

Not automatically. Both can take very sharp edges. Edge geometry, heat treatment and sharpening affect the result; the label alone cannot establish a winner. Carbon steel is more reactive, while stainless is generally easier to care for. Choose carbon because you want that ownership experience, not because stainless cannot cut well.

VG10 vs SG2: is powder steel worth the extra money?

SG2 can offer a useful wear-resistance benefit, but the finished knife determines whether that matters to you. Compare geometry, comfort, hardness, sharpening requirements and price. A well-chosen VG10 knife can be an excellent everyday tool. Powder metallurgy describes manufacture; it is not an overall quality score.

How much should I spend on a Japanese knife?

Set a budget for the whole setup. Under £100 can be a practical entry point; £100–£200 gives more choice; £200–£400 and above may add specialist materials, finishing or craftsmanship. These are shopping bands, not performance grades. A suitable board and a sharpening plan matter at every price.

Are Japanese knives suitable for left-handed cooks?

Many symmetrical double-bevel knives suit either hand. Some double-bevel grinds, sharpening ratios and handles are asymmetric. Traditional single-bevel knives are handed. Ask the retailer to confirm the specific model, especially before buying a yanagiba, deba, usuba or D-shaped handle.

What angle should I sharpen a Japanese knife at?

Follow the maker’s recommended angle and original bevel. Around 15 degrees per side is a common reference for some double-bevel knives, not a universal specification. A per-side angle is different from the total included angle. Traditional single-bevel knives need a different technique.

How often should I sharpen my knife?

When its cutting performance needs it. Frequency changes with the food, board, knife, technique and volume of cooking. If it starts slipping on tomato skin or needs more force in normal prep, assess the edge. A fixed monthly or yearly schedule cannot suit everyone.

What grit whetstone should I buy first?

A medium stone around 800–1,500 grit is a useful starting point for routine maintenance on many kitchen knives. Confirm suitability for your steel and follow the stone maker’s instructions. You will also need a stable holder and a way to keep the surface flat. Fine stones are optional; coarse repair work needs care.

Can I use a honing rod or a pull-through sharpener?

Only when it is suitable for the particular blade. Rods and fixed-angle sharpeners vary widely; a system suitable for one knife may damage another. Ask the maker or JKC before using one on a very thin, hard, asymmetric or single-bevel edge. Professional sharpening is a valid alternative to learning on an expensive knife.

What is the best chopping board for Japanese knives?

Choose a stable, adequately sized wooden board or a suitable plastic or rubber board recommended for fine blades. Avoid glass, stone and ceramic cutting surfaces. End-grain wood is one option, not a requirement. Follow the board’s cleaning guidance and prevent it sliding during use.

Can Japanese knives go in the dishwasher?

Hand-wash with mild detergent, rinse and dry thoroughly. Dishwashers expose knives to movement, harsh detergent, heat and extended moisture. Do not leave a knife soaking in a sink, even if its blade is stainless. Clean and dry the handle as well.

Is patina the same as rust?

No. A stable change in colour on reactive steel can be normal patina. Orange, flaky or pitted areas need attention; appearance alone is not always enough to identify the problem. A patina does not make a carbon blade rust-proof. Ask for advice if you are unsure.

Can I cut bones, frozen food or hard squash?

Do not use a fine all-purpose Japanese knife for bones or frozen food. Dense squash can also trap and damage a thin blade. Use an appropriate tool and controlled technique. A deba has specific fish-processing uses; a thin Chinese vegetable cleaver is not a bone cleaver.

How long do Japanese knives last?

A well-made knife can serve for many years with appropriate care, storage and sharpening. There is no universal lifespan: sharpening removes metal, and damage or corrosion can shorten service life. Buy with repair and sharpening support in mind rather than treating any knife as maintenance-free.

Does a higher Damascus layer count mean a better knife?

No. Layer count describes construction or appearance, not a standardized cutting score. In a typical clad knife, the core forms the edge. Compare the core steel, heat treatment, geometry and finish. Coreless constructions are a separate design, so always check the maker’s description.

How can I check a knife is genuinely made in Japan?

Look for a stated country of manufacture, an identifiable maker or brand, and a retailer that can explain the product’s specification and provenance. “Japanese steel” and “Japanese style” do not establish where the finished knife was made. Ask directly if the listing is unclear.

Do I need a complete knife set?

Start with an all-rounder and a small companion. Add a bread knife if you regularly cut crusty loaves, or a specialist when you repeatedly need its function. A set can be good value if every piece suits you; a matching appearance alone is not a reason to buy extra blades.

What should I choose as a gift?

A comfortable stainless all-rounder is a practical direction, but size and handle preferences are personal. If you cannot check them, consider a gift card or a visit together. Check engraving, delivery, age-verification and returns conditions before ordering a personalised knife.

Should I buy a knife because it looks good?

Enjoy a finish or handle you like, but first check purpose, geometry, comfort, care and sharpening. A beautiful knife that feels awkward will not become a good fit through appearance alone. Pay for craftsmanship because you value it, after the practical needs are met.

What should I establish before buying a knife?

Decide the main job, budget including accessories, preferred length, care routine and handedness. Then decide who will sharpen it and whether you want to learn. Check the precise steel, bevel, handle and country of manufacture before choosing the finish.

What is the difference between a petty, utility and paring knife?

Petty and utility overlap: both describe small companion knives, with lengths and blade heights that vary by maker. A paring knife is usually shorter for close control. Choose by the intended task and knuckle clearance, not just the product name. A bird’s-beak peeler has a curved edge for rounded produce.

Is a kiritsuke suitable as a first Japanese knife?

A modern double-bevel k-tip gyuto sold as a kiritsuke can be an all-purpose option. A traditional single-bevel kiritsuke is a specialist with different technique, handedness and sharpening requirements. Confirm which construction you are buying; the name and angular tip alone are not enough.

Is a Chinese cleaver suitable for chopping bones?

Only a model specifically designed for the bone work you intend. Many Chinese cleavers are thin slicing knives for vegetables and boneless ingredients. A large rectangular blade, extra weight or hanging hole does not establish its safe limits.

Can a ceramic knife be sharpened?

Yes, with a method approved for that particular ceramic knife. Kyocera offers appropriate diamond sharpeners for specified blades and models. Do not assume a steel-knife sharpener works on ceramic; check compatibility and use specialist service for damage beyond the tool’s limits.

Are 12C27 and 12C27M the same steel?

No. Alleima specifies them as distinct grades. Similar catalogue names do not make alloys identical. Check the exact product listing and maker’s care instructions rather than substituting one specification for the other.

Is Damascus a type of steel, and what does coreless mean?

Damascus usually describes layered construction or its visible pattern, not one fixed alloy. Many knives have a separate cutting core with patterned cladding. A coreless design instead uses a layered structure without that separate core. Confirm the steels used; layers are not a cutting-performance score.

Keep this reference handy

The language of Japanese knives.

Bevel
The surface ground towards the cutting edge.
Choil
The area at the rear of the blade, near the handle; often used to inspect the grind.
Cladding
Outer layers surrounding the core in a laminated blade.
Core
The steel that reaches the edge in a typical clad knife.
Distal taper
A change in blade thickness along its length towards the tip.
HRC
Rockwell C hardness: a measurement, not a quality rating.
K-tip
An angular, pointed tip seen on many bunkas and kiritsuke-style knives.
Patina
A surface colour change on reactive steel; it does not eliminate rust risk.
Tang
The part of the blade that extends into the handle.
Wa / yo
Common terms for Japanese-style and Western-style handles.
Deburring
Removing the fine burr created while sharpening an edge.
Thinning
Reducing material behind the edge to restore or alter geometry; a more advanced operation.
Research, sources & how to use this guide

This guide combines manufacturer documentation, published metallurgy research and JKC product information. Recommendations are practical starting points, not a hands-on product test or a scientific ranking. Individual knives vary; the maker’s instructions and current product specification take precedence. Product examples illustrate different choices, and JKC sells the linked products. Research checked 16 September 2026.

  1. Japanese Knife Company: choosing a first Japanese knifeFirst-knife guidance and intended use.
  2. Japanese Knife Company: knife blade shapesBlade families and specialist tasks.
  3. TOJIRO: about kitchen knivesManufacturer guidance on shapes, lengths and materials.
  4. Larrin Thomas: knife steels rated by a metallurgistTest methods, trade-offs and limits of steel rankings.
  5. Knife Steel Nerds: testing 48 knife steelsControlled edge-retention testing and geometry.
  6. Takefu Special Steel: original blade steelsSteel families and published alloy information.
  7. Takefu Special Steel: Super Gold 2Powder-metallurgy production and SPG2.
  8. Proterial: GIN 3Manufacturer identification of GIN 3 as stainless steel.
  9. Aichi Steel: stainless steels for bladesAUS-series steel classification.
  10. Shun: use and careTechnique, reactive edges, cleaning and storage.
  11. TOJIRO: frequently asked questionsBoard materials, sharpening stones and blade damage.
  12. Japanese Knife Company: general care instructionsJKC care advice and carbon-blade oiling.
  13. Shapton: whetstone FAQsStone preparation, flattening and drying.
  14. Japanese Knife Imports: knife-care FAQCladding, reactivity and handedness.
  15. Shun: knife construction and DamascusManufacturer diagrams of cladding and cutting cores (PDF).
  16. Knifewear: using a Chinese cleaverDistinguishing cleaver roles and techniques.
  17. Japanese Knife Company: sharpening servicesProfessional sharpening support.
  18. Japanese Knife Company: sharpening classesHands-on learning and guidance.
  19. Shun: blade steelsManufacturer descriptions of VG10, VG-MAX and other blade steels.
  20. Alleima: 12C27M12C27M composition and distinction from 12C27.
  21. Alleima: 12C27 material dataThe separately specified 12C27 grade.
  22. Takefu: V Gold XEOSManufacturer identification of VG-XEOS.
  23. Takefu: Super Gold STRIXSTRIX is a separate powder steel, not another spelling of SG2.
  24. Daido Steel: DSR1K6Manufacturer steel classification.
  25. ZWILLING: Takumi FC63 santokuFC63 is the stated cutting core; Damascus describes the layered construction.
  26. MIYABI: IKI MC66 santokuManufacturer use of MC66 as a powder-steel designation.
  27. Hokiyama: Sakon Western-style seriesSRS15 heritage and SRS13 model information; exact generations matter.
  28. Hokiyama: Sakon Japanese-style seriesYasugi steel names and traditional carbon/stainless families.
  29. Kyocera: ceramic-knife sharpenersManufacturer-approved diamond sharpeners for appropriate ceramic knives.
  30. Alleima: fine-carbide knife steelsFine carbide structures and edge formation.
  31. Shun: Kanso boning / fillet knifeA manufacturer example showing why filleting does not always mean flexible.
  32. Suisin: Sakimaru TakohikiMaker reference for a Sakimaru Takohiki profile.
  33. Misono: UX10 rangeManufacturer examples of honesuki and boning profiles.
  34. Japanese Knife Company: collection directoryCurrent collection names and destination links checked against the live directory.

Your next step

The right knife should
feel right in your hand.

Visit a Japanese Knife Company shop to compare the balance, handle and edge profile. Tell us what you cook—we can help narrow the choice.

Japanese Knife Company Baker Street shop