Which knives should a Japanese knife set include?
Short answer: The knives that should be in a Japanese knife set are a gyuto (or santoku) for most board work and a petty for small, precise jobs. A three-piece set adds a bread knife, nakiri or slicer for the way you cook; five pieces suit keen cooks who want a specialist for each task.
Key takeaways
- Build any Japanese set around a main knife – a 180–240mm gyuto or a 165–180mm santoku – plus a 120–150mm petty.
- Pick the third knife for what you cook most: a serrated bread knife for loaves, a nakiri for vegetables or a sujihiki for roasts and fish.
- Five-piece sets are good value only if you will use every knife; a gyuto and a santoku largely do the same job.
- Skip the honing steel. Kai, for one, calls sharpening steels completely unsuitable for its knives, so budget for a whetstone or professional sharpening instead.
- No knife in a typical Japanese set is meant for bones or frozen food, so a set won’t replace a cleaver.
What knives should be in a Japanese knife set?
Think in jobs rather than piece counts. Every kitchen needs a main knife for the board and a small knife for detail work; after that, add specialists only for tasks you do every week.
| Knife | Typical length | What it does | Include it if… |
|---|---|---|---|
| Gyuto (Japanese chef’s knife) | 180–240mm | Slicing, dicing and chopping meat, fish and vegetables | Always – it is your main knife |
| Santoku | 165–180mm | All-purpose; shorter than a gyuto, with a flatter edge and a rounded tip | You prefer a compact main knife (choose it instead of a gyuto) |
| Petty | 120–150mm | Trimming, peeling, shallots, fruit and fiddly garnishes | Always – it is the essential second knife |
| Nakiri | 165–180mm | Flat-edged vegetable knife for straight up-and-down cuts | You cook a lot of vegetables |
| Bread knife | 200–250mm | Serrated edge for crusty loaves, cakes and soft tomatoes | You buy or bake proper bread |
| Sujihiki (slicer) | 240–300mm | Long, narrow blade for roasts, ham and boneless fish | You carve joints or slice fish often |
What should a 2-piece, 3-piece or 5-piece set include?
2-piece: gyuto + petty (or santoku + petty)
This is the classic Japanese pairing, and it covers most everyday cooking: the big knife does the board work and the petty, which is often used alongside a gyuto, handles everything small. The MAC Chef Set of 2 is exactly this – a 210mm gyuto and a 140mm utility knife from MAC’s Chef series, which MAC makes with thin 2.0–2.5mm blades in its own molybdenum steel.
3-piece starter set
Add one specialist to that pair. If you eat a lot of bread, add a serrated bread knife; if you cook mostly vegetables, santoku + nakiri + petty works well; if you roast at weekends, a sujihiki earns its place. For most households that cook every day, three well-chosen knives are plenty.
5-piece set
Five pieces might combine a gyuto, santoku, nakiri, petty and bread knife. That gives you a knife for every job and good value per piece, but check for overlap and make sure you can store five blades safely – on a magnetic rack or in a block rather than loose in a drawer, where edges knock against each other.
Which Japanese knife set suits the way you cook?
Use this as a starting point, then adjust for the food you cook most often:
| If you cook… | Your core set | Worth adding |
|---|---|---|
| A bit of everything | Gyuto (about 210mm) + petty (120–150mm) | Bread knife |
| Mostly vegetables | Santoku or gyuto + nakiri + petty | Nothing else, for most cooks |
| Meat and Sunday roasts | Gyuto + petty + sujihiki | A honesuki if you buy whole birds |
| Fish and sushi | Gyuto + petty | A deba for whole fish and a yanagiba for sashimi |
| Bread and baking | Gyuto or santoku + petty + bread knife | Nothing else, for most cooks |
| In a small kitchen | Santoku (165–180mm) + petty | Nakiri |
For the specialist knives, see Which Japanese knife is best for cutting meat? and Which Japanese knife is best for filleting fish?
How can you tell if a “Japanese” knife set is made in Japan?
- Check where the knives are made, not just a Japanese name or “Japanese steel” on the box.
- Look for a named steel and hardness for each knife, such as VG10 at 60 ±1 HRC.
- Check each knife’s length and shape, so you know exactly what’s in the box and that nothing overlaps.
- Buy from a seller who can sharpen and repair them, because every knife in the set will need it.
Our MAC, Kai Shun, MIYABI, Yasuo and JKC AUS10 sets are all made in Japan.
What should you leave out of a Japanese knife set?
- Duplicate main knives. A gyuto and a santoku do much the same work; in most kitchens one is enough.
- A honing steel. Hard Japanese edges are maintained on whetstones, and Kai calls sharpening steels completely unsuitable for its knives.
- Steak knives you won’t use. If you want them, buy them separately – the Kai Shun Steak Knife Set, for example.
Remember, too, that no Japanese set replaces a cleaver: Kai says its blades are generally not suitable for bones or frozen food, and the same applies to most thin, hard Japanese edges.
Is a set better value than buying knives individually?
A set makes sense when you would use every knife and want them to match – the same steel, handle feel and sharpening routine. Buying individually wins when you only need two knives, want to mix brands and steels, or would rather put most of your budget into the main knife and add a petty later. We weigh this up in Should I buy one premium knife or a full knife set?
Which should you choose?
These are the sets we have in stock at the time of writing (October 2026). Browse all of our Japanese knife sets for the full range, and check each product page for the exact knives and lengths included.
- Everyday pair: the MAC Chef Set of 2 above, the MAC Chef Set of 3 if you want a third knife, or our own-label JKC AUS10 Set of 2, made in Seki by Suncraft.
- Premium pair: the MIYABI 5000MCD Knife Set of 2 (SG2 powder steel, which Zwilling calls MC63 and rates at 63 Rockwell) or the Kai Shun Classic Knife Set of 2 (VG-MAX, 61 ±1 HRC). The Kai Shun Classic Knife Set of 3 adds a third knife; our Shun Classic sets cost around £325–£420.
- Damascus looks, mid-range: the Yasuo 69 Layers Knife Set of 3 (also available as a Set of 2), from our Yasuo range with VG10 cores and 69-layer hammered Damascus, made in Seki.
- Bigger sets for gifts or first kitchens: the Masamune Nashiji Knife Set of 5 (MoV stainless, nashiji finish) and the Magoroku Saku Knife Set of 4 (MoV stainless), both around £150. The Masamune Black Knife Set of 4 is another four-piece option.
How Japanese Knife Company can help
If the set is a gift, knife product pages offer optional free engraving (engraved items can’t be returned unless faulty), and we offer furoshiki gift wrapping. Every knife you buy from us comes with one complimentary sharpening, and you can spread the cost with Klarna pay in 3. Not sure which combination suits you? Visit one of our London shops – Baker Street, Greek Street, Kensington, Chiswick or Wimbledon – and try different shapes with guidance in our knife studio.
Related questions
- Which Japanese knife should I buy first?
- Do I need a petty knife?
- Should I choose a Gyuto or a Santoku for everyday cooking?
- What is the best way to store Japanese knives?
- What knife size is best for me?
Sources
- Wikipedia – Japanese kitchen knife
- MAC Knife – Chef Series
- KAI Europe – Materials & care
- ZWILLING – MIYABI knives and knife sets
Reviewed by the Japanese Knife Company team, October 2026.