Are ceramic knives better than steel knives?
Short answer: Ceramic knives are not better than steel knives overall, but they are better at a few jobs. A Kyocera zirconia blade is harder than steel, holds its edge for a long time, never rusts and won’t taint food. It is also brittle: bones, frozen food, hard boards, twisting or a drop can chip it, and it needs diamond sharpening.
Key takeaways
- Are ceramic knives better than steel? For slicing fruit, vegetables and boneless food they can be; for everything else, steel wins.
- Zirconia ceramic is far harder than knife steel, so it resists wear and keeps its edge for a long time.
- It is also much more brittle: no bones, frozen food, pumpkins, prying or twisting, and no glass or stone boards.
- Ceramic can only be sharpened with diamond abrasives; we sharpen ceramic knives in our London shops and by post.
- Store a ceramic knife in a block, tray or sheath: zirconia isn’t magnetic, and a fall onto a hard floor can chip it.
- For most kitchens, steel should be the main knife and ceramic a specialist second knife.
What are ceramic knives made of?
Kyocera makes its kitchen knives from zirconia (zirconium oxide), an advanced fine ceramic that is sintered rather than forged. It is extremely hard. Kyocera’s data sheet for one of its dense zirconia grades, which lists knives among its uses, gives a Vickers hardness of 12.3 GPa, roughly 1,250 HV. A hardened Japanese steel blade at HRC 60–64 is around 700–800 HV.
That hardness is why ceramic resists wear and keeps its edge. The catch is toughness. Kyocera notes that ceramic doesn’t flex, so where a steel edge bends or rolls under stress, a ceramic edge chips, or the whole blade can snap.
Kyocera makes both white and black blades. Its HIP (hot isostatic pressed) blades are black zirconia given an extra sintering step, which Kyocera says makes them tougher and more durable. Not every black Kyocera blade is HIP, so check the specification if that matters to you.
Are ceramic knives sharper than steel, and do they stay sharp longer?
Out of the box, a good ceramic knife and a good Japanese steel knife are both very sharp. The difference is how long the edge lasts and how easily it comes back. Kyocera says its hard, wear-resistant blades stay sharp longer than metal knives, and on soft food such as fruit, salad and boneless fish, that is what you’ll notice.
A ceramic edge doesn’t roll or bend, though. It dulls through tiny chips, and once it is dull you can’t restore it on an ordinary whetstone or sharpening steel. A steel edge dulls sooner but comes back on a whetstone in minutes, and hard Japanese steels such as VG10 and SG2 hold their edge well between sharpenings. Over the life of a knife, that ease of upkeep usually matters more than a longer-lasting first edge.
Are ceramic knives better than steel for everyday cooking?
| Ceramic (zirconia) | Japanese steel | |
|---|---|---|
| Hardness | About 1,250 HV | HRC 58–64, about 650–800 HV |
| Edge retention | Very long on soft foods, though micro-nicks appear over time | Very good on harder steels, and easy to restore |
| Toughness | Brittle: chips or snaps under impact or twisting | Far more forgiving; very hard steels can chip, softer ones roll |
| Rust and staining | None; unaffected by acids and alkalis | Stainless resists rust but can stain; carbon steel rusts if left wet |
| Taste and colour | No metallic taste; cut fruit and vegetables discolour less | Carbon steel can react with acidic foods |
| Weight | Very light | Heavier, with more momentum for chopping |
| Sharpening | Diamond abrasives only; best done professionally | Whetstones at home or a sharpening service |
| Storage | Not magnetic: use a block, tray or sheath | Magnetic rack, block or sheath |
| Best for | Fruit, vegetables, herbs, boneless meat and fish | Everything, including harder and heavier jobs |
In short, ceramic wins on edge life, rust resistance and a non-porous surface that is easy to clean. Steel wins on toughness, versatility and ease of sharpening.
What should you never do with a ceramic knife?
Kyocera’s own care guidance is clear. Don’t use a ceramic knife to:
- cut frozen or half-defrosted food, bones, bone-in meat or fish, or crab;
- cut pumpkin, winter squash, coconut, corn on the cob, fruit stones or large blocks of hard cheese;
- prise out avocado stones, open shells or crush garlic with the flat of the blade;
- twist, tilt or lever the blade, or hack with it like a cleaver.
Use wood, bamboo or plastic boards, never glass, marble, granite, tile or stone (see why hard boards damage knives). Kyocera also recommends smooth slicing strokes with light pressure rather than forceful up-and-down chopping.
Are ceramic knives safe to use?
Yes, used as intended, but they need slightly different habits from steel:
- If it chips mid-cut: stop, look for the missing fragment and throw away any food it could have landed in.
- If you drop it: let it fall rather than trying to catch it. Kyocera warns that a fall onto a hard floor can chip the blade.
- Storage: zirconia isn’t magnetic, so a ceramic blade won’t hold on a magnetic rack. Kyocera recommends a block, tray or sheath, never loose in a drawer or the sink; our knife storage range has options.
- Washing: Kyocera recommends washing by hand. It says some plastic-handled models can go in the dishwasher (its US advice is top rack only), but we’d hand-wash, because one knock against the cutlery can chip the edge. The blade is non-porous, and Kyocera says it can be sanitised with a mild bleach solution.
How do you sharpen a ceramic knife?
Ceramic can’t be sharpened on ordinary whetstones. Kyocera warns that stones made for steel knives can damage a ceramic blade and recommends diamond instead: its electric diamond sharpener at home, or a sharpening service that uses a diamond wheel. Kyocera says small chips of around 0.5mm can be smoothed out at home with its diamond sharpener; for bigger chips or a blade that has gone dull, a professional diamond regrind is the answer.
The simplest option is to let us do it. We sharpen ceramic knives at all five London shops for £13 (blades up to 13cm) or £15 (over 13cm), or you can send them to us by post.
Which should you choose?
- Choose ceramic as a second knife if you prep lots of fruit, salad and vegetables, want a light knife that never rusts, and will treat it gently: the Kyocera Ceramic Knife Set of 3, the Kyocera Shin Black Ceramic Knife Set of 2 or the Artisan Ceramic Black Knife Set of 2 (Gyuto & Petty).
- Choose steel as your main knife for everyday all-round cooking, for example the Tojiro Basic Santoku 170mm: a VG10 core at HRC 60±1, under £60 at the time of writing (October 2026). For a longer blade, browse our chef’s knives.
- Choose neither for bones or frozen food: that is a job for a heavy meat cleaver such as the Suncraft Meat Cleaver, not a thin kitchen knife.
See our full range of ceramic knives.
How Japanese Knife Company can help
Japanese Knife Company is known for introducing ceramic blades to the UK. At our five London shops you can try knives with guidance before you choose (shop details). Every knife bought from us includes one free sharpening, and our sharpening and repair service looks after ceramic and steel blades alike, in our shops or by post.
Related questions
- What cutting board should I use with a Japanese knife?
- Can Japanese knives cut bones, frozen food, hard squash, coconuts, or other tough ingredients?
- Do Japanese knives chip easily?
- What is the best way to store Japanese knives?
- How much does professional knife sharpening cost?
Sources
- KYOCERA – Ceramic knife FAQ
- KYOCERA – Care and use guidelines for ceramic knives
- KYOCERA Europe – Recommended Handling (ceramic knives)
- KYOCERA Japan – セラミックナイフはじめてガイド (Ceramic knife beginner’s guide)
- KYOCERA Fineceramics Europe – ZO201N zirconia data sheet (PDF)
Reviewed by the Japanese Knife Company team, October 2026.