How do I remove rust from a Japanese knife?
Short answer: How to remove rust from a knife depends on how deep the rust goes. For light surface rust on a Japanese knife, rub the spot gently with a rust eraser, or a little mild cleanser on a soft sponge, then wash, dry and oil the blade. Stubborn rust needs patient, gentle work, and rust that has pitted the steel or reached the edge needs resharpening, ideally by a professional.
Key takeaways
- Small orange spots are surface rust and usually come off in minutes. Deal with them early, before they pit the steel.
- Work gently along the blade, keep your fingers away from the edge and test any cleaner on a hidden area first.
- Don’t scrub kurouchi or Damascus finishes, don’t use steel wool or metal scourers, and don’t soak knives in vinegar or water.
- Pitting (tiny craters in the steel) can’t be rubbed away; it needs sharpening or regrinding, ideally by a professional.
- Stainless knives can rust too: salt, acids and harsh detergents break down stainless steel’s protective layer.
- Afterwards, wash off every trace of cleaner, dry the knife thoroughly and give carbon steel a thin film of camellia oil.
What kind of rust is on your knife?
Before you start, work out what you are dealing with. Not every mark on a Japanese knife is rust, and the right fix depends on how deep it goes.
| What you see | What it is | What to do |
|---|---|---|
| Small orange or brown spots that rub off easily | Surface (flash) rust | Rust eraser or mild cleanser, then wash, dry and oil |
| An even grey, blue-grey or dark layer on carbon steel | Patina, not rust | Leave it: it helps protect the steel |
| Brown patches that don’t shift with light rubbing | Established rust | Repeat the gentle methods patiently, or bring it to us |
| Tiny dark craters left after the rust has gone | Pitting | Professional sharpening or regrinding |
| Rust along the cutting edge itself | Edge rust | Sharpen on a whetstone, or bring it to us |
How to remove rust from a knife, step by step
- Wash and dry the knife first. Wash it by hand with washing-up liquid and a soft sponge so you can see exactly where the rust is, then dry it.
- Start with a rust eraser. A rust eraser is a rubbery block with abrasive mixed through it, used rather like a pencil eraser. Rub the spot lightly, working along the length of the blade rather than towards the edge, and keep your fingers behind the edge. On a polished or satin blade, follow the direction of the existing finish so you don’t leave cross-scratches.
- Or use a mild cleanser. Tojiro’s own advice for rust is to scrub with cleanser on a sponge. A paste of bicarbonate of soda (baking soda) and water, applied with a soft cloth in the direction of the finish, is a gentler option that Kai suggests for spots on some of its Shun knives.
- For stubborn rust, be patient rather than aggressive. Repeat the gentle methods rather than reaching for something harsher. Avoid steel wool and metal scourers: Tojiro warns that hard scourers scratch the blade.
- If rust has reached the edge or left pits, sharpen. Tojiro’s alternative to cleanser is to resharpen the blade on a whetstone, which takes the rust off the edge along with a little steel. Deep pitting is best left to a professional.
- Wash again and rinse thoroughly. Remove every trace of abrasive, cleaner and rust, then dry the blade completely, including next to the handle.
- Protect the steel. Give carbon steel a thin film of camellia oil, and store the knife somewhere dry.
Can you use Bar Keepers Friend on a knife?
With care, and as a last resort rather than a first step. Bar Keepers Friend’s original cleanser contains oxalic acid and a fine abrasive, and the maker says it removes rust stains. Its own instructions are to test a small hidden area first, rub gently, not to let the product sit longer or rub harder than necessary, and to rinse thoroughly within a minute of applying it.
The maker also recommends that powder for non-magnetic stainless steel, such as sinks and cookware, and points users of magnetic stainless steel to a different product. Knife steels are magnetic, so use it sparingly on the affected spot, never on kurouchi or Damascus, and wash the knife thoroughly afterwards.
What should you avoid when removing rust?
- Steel wool, wire brushes and metal scourers. They scratch the blade, and Knife Steel Nerds notes that a finer surface finish improves corrosion resistance, so scratches give rust somewhere new to start.
- Rust erasers and cleansers on kurouchi. They remove the black forge finish. Treat the spot only, or bring the knife to us.
- Abrasives on Damascus. The pattern is revealed by etching, and abrasives dull its contrast.
- Vinegar, lemon juice or other acid soaks. These are often recommended online, but acid attacks bare carbon steel: in Knife Steel Nerds’ lemon-juice test, a carbon steel knife developed an obvious patina and its edge roughened and lost sharpness. Soaking also lets water into the handle, and Tojiro warns never to leave knives soaking.
- Oils that aren’t food-safe. Finish with a food-safe oil; see Which oil should I use on my Japanese knife?
Why do stainless steel knives get rust spots?
Stainless steel resists rust because chromium forms a thin, invisible film of chromium oxide on its surface. Kitchen knife steels are a compromise, though: they need carbon to harden, and Knife Steel Nerds explains that chromium tied up in carbides isn’t available to form that protective film. A hard stainless kitchen knife is stain-resistant, not rust-proof.
Common causes of rust spots on stainless knives are salty or acidic residue left on the blade and storage somewhere humid, both noted by Tojiro; soaps containing citrus extracts or bleach, which Kai warns can promote rust; and dishwashers. The appliance maker Zanussi explains that detergents containing acids or chlorine can break down stainless steel’s protective layer, and that food left on cutlery in the machine adds to the problem. The spots are usually superficial: remove them early with a rust eraser or mild cleanser, and dry the knife promptly to stop them coming back.
Carbon steel knives, such as those in Aogami or Shirogami steel, have no such protective layer, so they rust faster and need oiling as well as drying. If you’re deciding between the two, see Is a carbon steel knife worth it for a home cook?
What is pitting, and can it be fixed?
Pitting is localised corrosion that eats small, deep pits into the steel instead of staining the surface, and Knife Steel Nerds notes that pits are hard to remove by refinishing. On the flat of the blade, light pitting is mainly cosmetic, although pits can hold moisture, so keep them dry and oiled.
On or near the edge, it’s a different matter: the knife has to be sharpened back beyond the pits, which removes steel, and severe pitting may need the edge reshaped. That is a job for a professional. Our rust removal service starts from £6 and re-profiling from £12.
Is a knife safe to use after removing rust?
Yes, once the rust has gone and you have washed off every trace of cleaner or abrasive. Don’t prepare food with a visibly rusty blade, and after any cleaner, wash the knife again with washing-up liquid and warm water and rinse it well.
Rust doesn’t cause tetanus: the NHS explains that tetanus is caused by bacteria, found in soil and manure, getting into a wound. Any cut still deserves care. NHS advice is to get urgent help from a GP or NHS 111 if you are not fully vaccinated or are unsure, if dirt remains in the wound after cleaning, or if it becomes hot or swollen or you develop a fever, and to call 999 or go to A&E for a large or deep wound. This is general information, not medical advice.
How do you stop rust coming back?
- Wipe as you go, especially after acidic or salty food; Kai advises rinsing acidic food off straight after use.
- Wash by hand and dry straight away, and never leave a knife soaking. See How should I clean and dry my Japanese knife after every use?
- Keep Japanese knives out of the dishwasher. Kai says knives don’t belong in the dishwasher under any circumstances; see Are Japanese knives dishwasher safe?
- Oil carbon steel before storing it, with a thin film of camellia oil; our OIL Applicator makes this quick (fill it with camellia oil, sold separately).
- Store knives dry and ventilated, on a magnetic rack or in a block, never wet in a sheath or drawer. See What is the best way to store Japanese knives?
- Let carbon steel build a patina. Kai says a patina helps protect the edge from rust; Will my Japanese knife rust, stain, or develop a patina over time? explains what to expect.
Our care instructions and general care guide cover daily care in more detail.
What we recommend
- For light spots: the Naniwa Rust Eraser, under £50 at the time of writing (October 2026).
- To protect carbon steel: the OIL Applicator, filled with camellia oil.
- Starting out with carbon steel: the High Carbon Knife Set of 2 with Rust Removing Cream.
- For light edge rust as part of normal sharpening: a 1000/6000 combination stone; see How do I sharpen a Japanese knife on a whetstone?
- Dry, airy storage: a magnetic rack such as the Bisbell Magnetic Knife Rack Oak 450mm, or browse our knife storage.
How Japanese Knife Company can help
If rust is stubborn, has pitted the blade or sits on a kurouchi or Damascus finish you don’t want to scrub, bring the knife to us. Our sharpening and repair service at Baker Street, Greek Street, Kensington, Chiswick and Wimbledon offers rust removal from £6, chip removal and tip repairs from £6, re-profiling from £12, and traditional whetstone sharpening at £1.35 per inch for domestic double-bevel knives (£2.25 per inch for single-bevel).
You can also post knives to us. Send them by recorded delivery, with each blade wrapped individually (a sheath, roll or bag is ideal) and our Sharpening & Repairing Form. UK return postage is £12 for up to three knives and £16 for more than three, and knives come back by age-verified delivery with an adult signature. We can’t accept responsibility for parcels lost on the way to us, so use a recorded service.
Every knife bought from us comes with one complimentary sharpening, and our two-hour, hands-on knife sharpening class, designed for beginners with no more than six people per group, teaches you to look after your own edge. Find addresses and opening hours on our shops page.
Related questions
- Will my Japanese knife rust, stain, or develop a patina over time?
- Which oil should I use on my Japanese knife?
- What is the best way to store Japanese knives?
- How should I clean and dry my Japanese knife after every use?
- Are Japanese knives dishwasher safe?
Sources
- TOJIRO – 研ぎ方・お手入れ (sharpening and care, in Japanese)
- Shun Cutlery (Kai USA) – Use & Care
- Bar Keepers Friend – Cleanser & Polish
- Knife Steel Nerds – Which Knife Steels Have the Best Corrosion Resistance?
- NHS – Tetanus
Reviewed by the Japanese Knife Company team, October 2026.