Are Takamura knives worth the money?

Short answer: Yes — Takamura knives are good, and worth the money if you want a very thin, light, sharp knife. The Takamura Aka SG2 gyuto comes from a family workshop in Echizen, Fukui, and pairs hard SG2 (R2) powder steel, at around HRC 64, with a remarkably thin grind. It’s less forgiving of bones, twisting and careless storage.

Key takeaways

  • Takamura Hamono is a family workshop in Echizen, Fukui Prefecture, founded in December 1945 by Isamu Takamura; it has made knives with powdered high-speed steel cores since 1982.
  • SG2 (Takefu’s “Super Gold 2”) and R2 (Kobelco’s name) are generally treated as the same powder stainless steel.
  • The Aka SG2 gyuto is thin, light and hard (we list it at around HRC 64), so it holds a keen edge for a long time but can chip if misused.
  • It suits confident cooks who slice more than they chop; heavy-handed beginners will be happier starting with a tougher VG10 or AUS10 knife.
  • Look after it with a wooden board, hand-washing, a blade guard and whetstone sharpening.

Who makes Takamura knives?

Takamura Hamono Seisakusho (高村刃物製作所) is a family knife workshop in Echizen City, Fukui Prefecture. Isamu Takamura, who began his blacksmith apprenticeship at 13, founded it in December 1945, and his son Toshiyuki started researching sharper stainless kitchen knives from around 1954. The company says it has made forged stainless knives in-house, from start to finish, since 1958.

Echizen is one of Japan’s oldest blade-making areas: Takamura traces it back to 1314, when the Kyoto swordsmith Chiyozuru Kuniyasu settled there. The workshop moved early into modern steels, beginning production of knives with powdered high-speed steel cores in 1982 and powdered stainless cores in 1985. In 2015 Toshiyuki Takamura was recognised by Japan’s Ministry of Health, Labour and Welfare as a Contemporary Master Craftsman, and in 2016 he received the Medal with Yellow Ribbon.

Are SG2 and R2 the same steel?

For practical purposes, yes. SG2, short for “Super Gold 2”, was designed for knives by Takefu Special Steel, which filed its patent in 1991. R2 is the name used by Kobe Steel (Kobelco), and the Zknives steel database notes that Kobelco apparently supplies R2 to Takefu, which sells it as SG2. So, as far as published sources show, a knife labelled R2 and one labelled SG2 use the same powder stainless steel; what differs is each maker’s heat treatment and grind.

According to Knife Steel Nerds, SG2 combines around 14–15% chromium, 2–3% molybdenum and about 2% vanadium with high carbon, and is made by powder metallurgy. Tested at the same hardness as VG10, it showed similar toughness and corrosion resistance, and Knife Steel Nerds estimates its wear resistance, the property that does most to decide how long an edge lasts, to be higher. Zknives gives a working hardness of up to 64 HRC, which is about where we list the Takamura.

What makes the Takamura Aka SG2 special?

The Aka (“red”) SG2 takes its name from its red handle; Takamura’s own catalogue lists its wine-red-handled knives in 180mm and 210mm gyuto, plus santoku and petty sizes. The blade has three layers: a hard SG2 core sandwiched between softer outer layers.

The real story is the grind. The blade is very thin behind the edge, the kind of knife enthusiasts call a “laser”, so it wedges far less in dense vegetables such as carrots and potatoes than a thicker knife, and it’s light enough for long prep sessions. Combine that with SG2 at around HRC 64 and you get a knife that cuts with very little effort and keeps its edge well between sharpenings.

Are Takamura knives good for beginners?

They can be, because technique matters more than experience. A careful beginner will love a Takamura; a heavy-handed one risks chipping it.

A Takamura suits you if…

  • You slice with a push or pull stroke rather than hacking or heavy rocking.
  • You mostly cut vegetables, herbs, boneless meat and fish.
  • You’ll hand-wash and dry it, and store it in a guard, a block or on a magnetic rack.
  • You’re upgrading from a Tojiro, MAC or German knife and want more cutting performance.

Think twice if…

  • You cut through chicken bones, frozen food, hard squash or coconut; those jobs need a cleaver.
  • You scrape chopped food across the board with the edge, or twist the blade when it sticks.
  • Your knives go in the dishwasher or loose in a drawer.
  • The knife will be shared, or used hard in a busy commercial kitchen.

If that second list sounds familiar, a sturdier knife makes a better first step: the Tojiro DP VG10 Gyuto or JKC AUS10 Gyuto, both HRC 60±1, are far more forgiving. Small chips on a Takamura can be repaired (our chip removal starts from £6 and re-profiling from £12 at the time of writing), but prevention is cheaper.

How does Takamura compare with the alternatives?

Knife Steel Hardness Character Price at JKC (Oct 2026)
Takamura Aka SG2 Gyuto SG2 powder steel, 3 layers About HRC 64 (our listing) Very thin and light, red handle Under £250
MIYABI 5000MCD Gyuto MC63 microcarbide powder-steel core, 101-layer damascus Around HRC 63 (ZWILLING) CRYODUR ice-hardened, D-shaped masur birch handle Around £220–£360
MAC Pro Gyuto 200mm MAC stainless, single layer About HRC 60 Bolstered and sturdier Around £200
Tojiro DP VG10 Gyuto VG10, 3 layers HRC 60±1 Bolstered workhorse, easy to sharpen From just over £100
JKC AUS10 Gyuto AUS10, 3 layers HRC 60±1 Full tang, stainless bolster, pakkawood handle Around £110–£130

How do you look after a Takamura?

  1. Cut on a wooden or soft board, never glass, stone or ceramic.
  2. Slice rather than chop forcefully, and lift the blade straight out if it sticks.
  3. Keep it away from bones, frozen food and very hard squash.
  4. Hand-wash and dry it straight away. SG2 is stainless, but it still shouldn’t be left wet.
  5. Store it in a magnetic guard or sheath, in a block or on a magnetic rack.
  6. Sharpen on whetstones, such as a 1000/6000 combination stone. SG2’s extra hardness makes it a little slower to sharpen than VG10, but it contains little of the hardest vanadium carbide, and Knife Steel Nerds expects it to be easier to finish than powder steels such as S30V or M390.
  7. Leave chips and broken tips to a professional sharpener.

Which Takamura should you choose?

You’ll find everything we stock from the workshop on our Takamura brand page.

How Japanese Knife Company can help

  • Feel the difference a thin grind makes: compare thin and sturdier knives side by side, with guidance, in the knife studio at our London shops in Baker Street, Greek Street, Kensington, Chiswick and Wimbledon.
  • Free first sharpening: every knife bought from us includes one complimentary sharpening. After that, our whetstone sharpening and repair service costs £1.35 per inch for domestic double-bevel knives at the time of writing, in store or by post.
  • Learn to sharpen it yourself: our two-hour, hands-on sharpening class is designed for beginners, with no more than six people per group.
  • Free engraving and flexible payment: add names, initials or a short message at checkout, and spread the cost with Klarna pay in 3 on website orders.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
34