Are Miyabi knives made in Japan?

Short answer: Yes. MIYABI knives are made in Japan, in Seki (Gifu Prefecture), at the factory ZWILLING J.A. Henckels Japan established there in 2004, and ZWILLING’s UK listings give Japan as the country of origin for every MIYABI series. MIYABI belongs to the German ZWILLING group from Solingen, so the brand is German-owned but Japanese-made, pairing Seki craftsmanship with ZWILLING’s ice-hardening technology.

Key takeaways

  • MIYABI is the Japanese knife brand of ZWILLING, the Solingen company whose trademark was registered in 1731 and which has belonged to Germany’s Werhahn Group since 1970.
  • ZWILLING J.A. Henckels Japan set up its own factory in Seki in 2004. Seki has been a centre of Japanese sword-making and cutlery since the 14th century.
  • All nine MIYABI series on ZWILLING’s UK website, including Kaizen II, Koh, Koya, Artisan, Black and Tenmei, are listed as made in Japan.
  • ZWILLING says a MIYABI knife takes more than 100 production steps and is “created by hand – with the help of machines, never by machines alone”.
  • The German contribution is technology, above all ice-hardening (CRYODUR and FRIODUR), rather than the place of manufacture.
  • We stock two MIYABI ranges: 5000MCD (MC63 powder steel, 62–64 HRC) and 4500FCD Mikoto (FC63 steel, 63 HRC).

Are MIYABI knives made in Japan or Germany?

MIYABI knives are made in Japan. ZWILLING J.A. Henckels Japan established its own factory in Seki, Gifu Prefecture, in 2004, and ZWILLING’s UK listings for both MIYABI ranges we sell state that the knives are made in Seki.

The confusion comes from ownership. MIYABI is part of the ZWILLING group from Solingen, Germany, where Peter Henckels registered the ZWILLING trademark in 1731. The group, which also includes STAUB, BALLARINI and DEMEYERE, has been wholly owned by Wilh. Werhahn KG since 1970. A MIYABI is therefore a German-owned, Japanese-made knife, not a German knife with a Japanese name.

Is MIYABI the same as ZWILLING?

Not quite. MIYABI is a separate brand within the ZWILLING group, listed by ZWILLING as its Japanese brand alongside STAUB (France), BALLARINI (Italy) and DEMEYERE (Belgium). Its knives are Japanese in design as well as origin: gyutoh, santoku, nakiri, shotoh and sujihiki shapes, hard steels such as MC63 powder steel and FC63 fine-carbide steel, and thin, hand-honed edges.

In other words, a MIYABI isn’t a re-badged ZWILLING knife: it is a Japanese knife made in Japan by a company that ZWILLING owns.

Why does a German company make knives in Seki?

Seki has been a centre of Japanese sword-making and cutlery since the 14th century. ZWILLING explains that after the samurai era the city’s blacksmiths turned their sword-making knowledge to knives, and that making Seki MIYABI’s production base brings German technology and Japanese craftsmanship together.

The German side shows most clearly in the heat treatment. ZWILLING applied for a patent on its ice-hardening process in 1939, and it says MIYABI knives are ice-hardened immediately after forging: the 5000MCD uses CRYODUR hardening at −196°C, while the 4500FCD Mikoto is double ice-hardened FRIODUR. The blade shapes, hard steels and fine edges are thoroughly Japanese.

Are MIYABI knives handmade?

They are factory-made with a great deal of hand work. ZWILLING describes MIYABI knives as “created by hand – with the help of machines, never by machines alone”, and its Japanese brand story says a single knife takes more than 100 steps (an image caption puts it at 100 steps and 42 days). Edges are finished with traditional Honbazuke hand-honing, which ZWILLING specifies at 9.5° to 12° on the 5000MCD.

That puts MIYABI alongside other well-made factory knives rather than one-smith workshop blades. Neither approach is automatically better: heat treatment, blade geometry and consistency matter more than the label, as we explain in Is a hand-forged knife better than a machine-made one?

Are all MIYABI ranges made in Japan, including Kaizen?

Yes, as far as ZWILLING’s UK website shows. Its MIYABI range page lists nine series (Birchwood 5000MCD, Kaizen II 5000FCD, Koh 4000FC, Koya 4000FCv2, Artisan 6000MCT, Black 5000MCD67, Mikoto 4500FCD, Iki and Tenmei). Every knife there that carries a country label says “Made in Japan”, and the Mikoto product pages give Seki, Japan. We stock two of those ranges, and the real differences between them are the steel, the layering and the handle:

MIYABI range Core steel Blade Hardness Handle Made in
5000MCD (we stock) MC63 microcarbide powder steel Core inside 100 layers of flower-pattern damascus, CRYODUR ice-hardened 62–64 HRC D-shaped Masur birch Seki, Japan
4500FCD Mikoto (we stock) FC63 fine-carbide steel 101 layers, diamond damascus pattern, double ice-hardened FRIODUR 63 HRC Ivory-toned linen Micarta, concealed tang Seki, Japan
Kaizen II 5000FCD FC61 steel Core inside 48 layers, double ice-hardened About 61 HRC D-shaped black pakkawood Seki, Japan

ZWILLING’s UK range menu names the 5000MCD series “Birchwood SG2 5000MCD”, which is why you will also see it described as SG2. Powder steels at this hardness hold an edge for a long time, but they usually need a little more patience on a whetstone; see Is SG2 (R2) steel hard to sharpen?

Does it matter where you buy a MIYABI?

Check that the box or listing names Japan (Seki) as the country of origin and that the specification matches ZWILLING’s own description of the range. If the manufacturer’s warranty matters to you, make sure the seller is an authorised MIYABI stockist: ZWILLING’s UK lifetime warranty covers MIYABI for domestic use against defects in manufacture and materials, but ZWILLING won’t handle warranty enquiries for purchases made from unauthorised resellers, and claims are for products bought in the UK and Ireland.

Read the exclusions too. They include normal wear and tear, misuse or abuse, accidental damage, commercial use and products with wooden parts, which may matter for the birch-handled 5000MCD. Chips from bones or drops, and knives used in a professional kitchen, are therefore unlikely to be covered. Your statutory rights for faulty goods apply regardless; see Do your knives come with a warranty? This is general information, not legal advice.

Which should you choose?

At the time of writing (October 2026), our MIYABI knives sit in the premium band of roughly £220–£360 per knife.

How Japanese Knife Company can help

Our London shops in Baker Street, Greek Street (Soho), Kensington, Chiswick and Wimbledon have a knife studio where you can try knives with guidance (see Can I try a knife before I buy it?); call 020 7224 2422 to check which MIYABI models are on display. Every knife you buy from us comes with one complimentary sharpening, and our whetstone sharpening service handles double-bevel knives such as MIYABI from £1.35 per inch (domestic), in store or by post. Knife product pages also offer optional free engraving; note that engraved knives can’t be returned unless faulty.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
30