What is the best way to store Japanese knives?

Short answer: The best way to store Japanese knives is on a wooden magnetic knife strip or in a well-made knife block, with each blade clean, completely dry and kept away from other utensils. If you keep knives in a drawer, use a drawer insert or put every knife in a sheath or saya so the edge never touches anything.

Key takeaways

  • Protect the edge: hard, thin Japanese edges can chip when they knock against other metal.
  • Store knives clean and fully dry; Tojiro warns that long storage somewhere humid can cause rust.
  • A wood-faced magnetic rack keeps blades visible, airy and easy to wipe; never slide the edge along it.
  • Knife blocks are tidy but need regular cleaning, and only clean, dry knives should go in.
  • Drawers are fine only with an insert or a sheath on every blade; knife rolls are for transport.

Why does storage matter for Japanese knives?

Most Japanese kitchen knives have hard, thin edges that hold their sharpness well but can chip if they knock against other metal. MIYABI’s care instructions recommend a knife block, magnetic strip or knife sheath specifically to protect the blade and prevent damage to the edge from other utensils. Kai, which makes Shun, gives the same advice: the blade shouldn’t touch other metal objects, and a knife block, a wooden drawer insert or a wooden magnetic rack all do the job. Zwilling’s general knife care guide adds that good storage should deliver safety, protection of the blade, cleanliness and convenience.

Moisture is the other enemy. Tojiro advises drying knives fully before putting them away, and warns that long storage in a humid place can cause rust. Carbon steel is the most vulnerable.

What is the best way to store Japanese knives at home?

Option Pros Cons Best for
Wood-faced magnetic rack Edge touches only wood; blades air-dry; easy to wipe; fits any blade shape Needs wall space; knives must be hung with care Most home kitchens
Bare steel magnetic strip Saves space Metal-on-metal contact can mark edges and finishes A wooden rack is kinder
Slotted knife block Tidy; edges covered Slots are hard to clean; wide or long Japanese blades may not fit; edges can drag on slot walls Sets that fit the slots
Universal (filled) block Takes most blade shapes The filling needs regular cleaning Mixed collections
Drawer insert Out of sight; edges kept apart Uses drawer space; check blade lengths Kitchens without wall space
Sheath, blade guard or saya Protects each edge, in a drawer or on the move Blade and sheath must be dry; a saya fits a specific knife Drawers, travel, long slicers
Knife roll or bag Portable Not designed for everyday storage at home Chefs carrying knives to work

How do you use a magnetic knife strip without damaging the edge?

  1. Mount it away from the hob and sink, out of steam and splashes, and at a height where blades aren’t at face level.
  2. To hang a knife, touch the spine to the rack first, then roll the blade flat against it.
  3. To take it down, pivot on the spine so the edge lifts away first, rather than sliding the edge along the surface.
  4. Hang only clean, dry knives, and wipe the rack now and then.

Our wooden racks include the Bisbell Magnetic Knife Rack in oak (450 mm), the Bisbell acacia rack (300 mm) and the Noyer walnut magnetic knife rack.

Are knife blocks hygienic?

They can be, if you look after them. You can’t see inside the slots, so crumbs and moisture can collect there unnoticed; only put knives in once they’re washed and fully dry. Zwilling’s care guide recommends wiping knife blocks regularly with a damp cloth or non-abrasive sponge and drying them with a tea towel, and says wooden blocks shouldn’t be soaked, put in the dishwasher or kept near heat such as radiators or direct sunlight. Turning a slotted block upside down and shaking it out occasionally also helps.

Before buying a block, check that your longest and tallest blades will fit. We stock the ARTELEGNO walnut knife block and the TOG small knife block.

Can you keep Japanese knives in a drawer?

Only if each edge is protected. Loose knives rattle against each other and your other utensils, which is exactly the damage MIYABI’s guidance aims to prevent, and they’re a hazard to fingers. Use a drawer insert, or give every knife its own cover. Our sheath cover for santoku, gyuto and nakiri up to 200 mm fits santoku, nakiri and gyuto with blades up to 200 mm, so a 210 mm or 240 mm gyuto is too long for it. There are also versions for slicers and yanagiba up to 310 mm and for utility knives up to 150 mm. A magnetic guard is another option.

A saya, the traditional wooden sheath, protects the edge well but is made for a particular blade: our Zuiun saya, for instance, only fit Zuiun and Kiwami knives. Make sure both blade and saya are dry before you sheathe the knife. For help choosing between a saya, a sheath and a magnetic guard, see Do I need a saya or blade guard for my knife?

Storing knives you won’t use for a while

MIYABI suggests wrapping knives in a cloth or newspaper and keeping them somewhere dry. For carbon steel, wipe on a thin film of camellia oil first; our oil applicator makes this easy (fill it with camellia oil, sold separately).

Which should you choose?

  • Most kitchens: a wooden magnetic rack.
  • No spare wall: a knife block that fits your blades.
  • Drawer storage: a sheath or magnetic guard on every knife, or a drawer insert.
  • Long slicers and single-bevel knives: a slicer sheath or a fitted saya.
  • Taking knives to work: a canvas and leather, rubber or nylon knife roll, with a sheath on each blade.

Browse our full knife storage range.

How Japanese Knife Company can help

Visit any of our five London shops for advice on storing the knives you already own. If an edge has already suffered in a drawer, our whetstone sharpening and repair service offers chip removal from £6 at the time of writing (October 2026), and every knife bought from us comes with one complimentary sharpening.

Related questions

Sources

Reviewed by the Japanese Knife Company team, October 2026.

0
30