Showing 1–96 of 116 results

Tsuchime Gift Set of 3 Knives

£109.00
This 3 piece set is forged from a high quality (M/V) stainless steel that is very sharp and easy to resaharpen on the KC 100 Water Wheel sharpener. The knives are made by a commercial knife maker in Japan that only supplies large retailers and Department stores in Japan. |Is made by a very modern factory that uses robots and automated processes to achieve exacting standards expected by Japanese consumers and will compare to any Western made resharpenknife at even twice the price. The Tsuchime finish reduces the adhesion of sticky foods by breaking the vacuum between a smooth surface of the blade and the food being cut. Fantastic value. Knives Sizes: Small Deba: 120mm Santoku: 170mm Nakiri: 170mm

Tsuchime Gift Set of 3 Knives (Western handle)

£109.00
Knives Sizes: Small Utility: 135mm Santoku: 165mm Nakiri: 170mm Fantastic value Stainless steel Made in Japan

High Carbon 2 Knives Set + Rust Removing Cream

£84.00
Nakiri (VEG) & Santoku (Multi-Purpose) Shirogami Steel (Carbon Steel) Iron Clad (Whole Blade Rusts) Rust Removing Cream Included Wooden Handle Made in Japan

Shiro 3 Layer Santoku 165mm

£96.00
Shirogami Steel (Carbon Steel) Iron Clad (Whole Blade Rusts) Semi Stainless Steel Wooden Handle Made in Japan

Tojiro VG10 NB (Set of 3)

£145.00
1x Utility 135mm 1x Nakiri 160mm 1x Santoku 170mm (multipurpose) VG10 Stainless steel blade Three layers blade Wooden handle Made in Japan

Tojiro VG10 NB (Set of 2)

£94.00
1 x Utility 135mm 1 x Santoku 170mm (multipurpose) VG10 Stainless steel blade Three layers blade Wooden handle Made in Japan

JKC AUS8 Santoku 167mm

£84.00
AUS8 Stainless steel 3 Layers blade Hardness 59 HRC + /- 1 Pakkawood handle Made in Japan

Masamune Nashiji Gift Set

£109.00
Stainless Steel Molybdenum Vanadium Single Layer Hardness HRC 59 + /- 1 Traditinal handle Made in Japan

Saku 69 Layer Santoku 175mm

£84.00
  • Blade: Laminated forged composite steel (69 layers Damascus steel)
  • Handle: ABS Resin
  • Layers: 69 layers
  • Hardness: 61:62
  • Maker: Satake
  • Blade: Double-edge Blade
  •  Made in Japan

JKC AUS8 Set of 3

£229.00
AUS8 Stainless steel 3 Layers blade Hardness 59 HRC + /- 1 Pakkawood handle Made in Japan

JKC AUS8 set + Kyocera Rod + JAP4

£256.50
This compact Entry Level collection of the 3 most important knives in any kitchen is Stamp Forged from a 3

Kyocera Shin Black Ceramic Knives (Set of 2)

£130.00
Kyocera Shin Black Ceramic Knives Gift Set Chef’s Santoku 160mm Utility Knife 110mm Attractive gift box Tip: This knife is

JKC 63 Layer Santoku

£214.00£229.00
Hyper Molybdenum Vanadium Stainless steel 63 Layers Blade Hardness 59 HRC + /- 1 Wooden handle Made in Japan

Premium Seki Knife Set Of 3

£549.00
Set: Paring Knife, Utility knife, Chefs knife & Wooden box SG2 Powder steel Stainless steel Three layers blade Hardness HRC 64 + /- 1 Pakkawood handle Made in Japan

Kyocera Ceramic Knives (Set of 3)

£114.00
Kyocera Ceramic Knives Gift Set Chef’s Santoku 140mm Utility Knife 115mm Paring Knife 75mm        Dish Washer Safe

Keyaki Shiro 3 Santoku 165mm

£149.00
Shirogami No. 2 Blade oxidize 3 Layers blade Hardness HRC 62+ /- 1 Wooden handle Made in Japan

Kyoto Santoku 180mm

£99.00
AUS8 Stainless Steel 3 Layers blade Hardness HRC 59+ /- 1 Stainless steel handle Made in Japan

Senzo T Small Santoku 143mm

£134.00
VG10 stainless steel 69 Layers blade Hardness HRC 60+ /- 1 Pakkwood traditional handle Made in Japan

Zanmai New Elite Santoku 180mm

£249.00
Handmade VG10 Stainless Steel 33 Layers thin blade Hardness HRC 60 + /- 1 Hardwood handle Made in Japan

Tsuchime Traditonal Sushi Gift Set

£109.00
This 3 piece set is forged from a high quality (M/V) stainless steel that is very sharp and easy to resaharpen on the KC 100 Water Wheel sharpener. The knives are made by a commercial knife maker in Japan that only supplies large retailers and Department stores in Japan. |Is made by a very modern factory that uses robots and automated processes to achieve exacting standards expected by Japanese consumers and will compare to any Western made knife at even twice the price. The Tsuchime finish reduces the adhesion of sticky foods by breaking the vacuum between a smooth surface of the blade and the food being cut. Fantastic value.

Saji Craft Santoku 170mm

£579.00
Premium collection Fully Handmade by Master Blacksmith VG10 stainless steel 129 Layers blade Hardness HRC 60+ /- 1 Staghorn handle Made in Japan

Kakumei Santoku 170mm

£44.00
Blade: Molybdenum Stainless Steel Handle : Black Pakkawood Hardness: 57± Made in Japan

TOJIRO Shippu VG10 Damascus Steel (Set of 3)

£429.00
Utility/ Santoku/ Gyuto VG10 Stainless steel blade Damascus Blade Magnolia Wood + Buffalo Horn Collar handle Handmade Made in Japan

Kai SHUN Classic Santoku

£129.00£197.00
Stainless Steel VG MAX steel 33 Layers blade Hardness 61 HRC + /- 1 Traditional Pakkawood Handle Made in Japan

Miki Aogami Super Santoku 180mm

£129.00

Aogami Super steel
Blade core oxidizes
3 Layers blade
Pakka wood handle
Hardness 63 HRC + /- 1
Made in Japan

Miyabi 5000 MCD set of 5

£2,025.00
Premium Collection Set R2 Powder steel blade 101 layers blade CRYODUR ice-hardened Hardness HRC 64+ /- 1 Birchwood handle Steel end-cap & handle mosaic pin Made by MIYABI in Japan

Zanmai Musou Santoku

£229.00£269.00
Premium Collection 3 Layers Blade SGP2 Powder Steel Wooden handle Hardness 64± Made in Japan

Kai SHUN Classic Scalloped Santoku 160mm

£177.00
Stainless Steel VG MAX steel 33 Layers blade Hardness 61 HRC + /- 1 Traditional Pakkawood Handle Made in Japan

Kai SHUN Classic Wide Santoku Knife 180mm

£224.00
Stainless Steel VG MAX steel 33 Layers blade Hardness 61 HRC + /- 1 Traditional Pakkawood Handle Made in Japan

Miyabi 5000 MCD set of 5 with Block

£2,129.00
Premium Collection Set R2 Powder steel blade 101 layers blade CRYODUR ice-hardened Hardness HRC 65+ /- 1 Birchwood handle Steel end-cap & handle mosaic pin Made by MIYABI in Japan

Yoshida Aogami Funayuki 175mm

£174.00
Steel: Aogami 2 Blade core oxidizes 3 Layers blade Hardness: 60:62 HRC Handle Japanese Octagonal WA Material: Maple with Laminated Hardwood Ferrule Maker: Yoshida Hamono Hot Forged by Hand

Miyabi 5000 MCD set of 4

£1,596.00
Premium Collection Set R2 Powder steel blade 101 layers blade CRYODUR ice-hardened Hardness HRC 64+ /- 1 Birchwood handle Steel end-cap & handle mosaic pin Made by MIYABI in Japan

Takefu Aogami Santoku 165mm

£289.00
Fully Handmade Aogami Super (Blue) Steel 3 Layers blade Core layer oxidizes Hardness HRC 63+ /- 1 Keyakiwood Handle Made in Japan

Premium Seki Knife Set Of 2

£469.00
Set: Small Utility knife, Chefs knife & Wooden box SG2 Powder steel Stainless steel Three layers blade Hardness HRC 64 + /- 1 Pakkawood handle Made in Japan

Masamune Black Santoku 170mm

£39.00
  • Steel: High Carbon M/V
  • Blade: Single Layer
  • Handle: ABS resin, TPR
  • Hardness: 58-60 HRC
  • Made in Japan

Ryusen 63 Layer Santoku 170mm

£349.00
Premium collection VG10 stainless steel 63 Layers blade Hardness HRC 60+ /- 1 Black plywood reinforced wood handle Made in Japan

Heptagone 3 Layer Santoku 170mm

£154.00
Steel: VG2 Stainless Steel with Stainless Steel Cladding Handle: Wa (Japanese) Handle - Pakkawood (Heptagonal) Ferrul: Black Pakka wood Hardness: 57–59 Layer: 3 Layer Made In: Seki, Gifu, Japan

Kakumei Small Santoku 135mm

£34.00
Blade: Molybdenum Stainless Steel Handle : Black Pakkawood Hardness: 57± Made in Japan

OUL Ginsan Santoku 180mm

£469.00
Fully Handmade Ginsan Steel (Silver paper) Stainless Steel 3 Layers blade Hardness HRC 62+ /- 1 Octagonal traditional handle Made in Japan

Oukokuryu 99 Layers Santoku 170mm

£799.00

Fully Hand Forged by Master Blacksmiths at Ryusen Hamono
Maker: Ryusen Hamono
Steel: SPG2
Blade: 99 Layers
Handle:  Stabilized Poplar Wood
Hardness: 62± One of the Sharpest Edge
Made in Japan

JKC 63 Layer Set of 2 ( Santoku & Nakiri )

£428.00
Hyper Molybdenum Vanadium Stainless steel 63 Layers Blade Hardness 59 HRC + /- 1 Wooden handle Made in Japan

JKC 63 Layer Set of 2 ( Santoku & Utility )

£398.00
Hyper Molybdenum Vanadium Stainless steel 63 Layers Blade Hardness 59 HRC + /- 1 Wooden handle Made in Japan

Blazen Wa Santoku 175mm

£399.00
Fully Hande Forged by Master Three Layers Blade SG2 Powdered Steel Walnut Handle Hardness 63± One of the Sharpest Edge Made in Japan

Tsune VG10 33 Layers (Set of 3)

£699.00
Set: Utility/Vegetable/Multipurpose Knife VG10 Stainless Steel 33 Layers/ Hardness HRC 61 + /- 1 PRed akkawood handle Made in Japan

Takefu Aogami Set of 2

£508.00
Fully Handmade Aogami Super (Blue) Steel 3 Layers blade Core layer oxidizes Hardness HRC 63+ /- 1 Keyakiwood Handle Made in Japan

Takefu Aogami Set of 4 with Block

£1,282.50
Fully Handmade Aogami Super (Blue) Steel 3 Layers blade Core layer oxidizes Hardness HRC 63+ /- 1 Keyakiwood Handle Made in Japan

Pateru 10A Santoku 165mm

£144.00
  • Blade Material: AUS-10 Stainless Steel
  •  Hardness: 60±1 HRC
  •  Layer: 69 layers
  • Blade: Double bevelled & Half Tang
  • Blade Finish: Hammer finish
  •  Handle: WA (Japanese) Handle – Clear Oak Tree wood
  •  BRAND: PATERU
  •  Made in Japan

Pateru Traditional Santoku

£139.00£159.00
  • Handle: WA (Japanese) Handle – Magnolia
  • Blade Material: Shirogami #2 With Carbon Steel Cladding Rust Prone
  • Hardness: 62±1 HRC
  • Layer: 2 layers
  • Blade: Double& single beveled & Half Tang
  • Made in  JAPAN
  • Blade Finish: Matt finish
  • BRAND: PATERU

Suzuki Black Santoku 165mm

£199.00
  • Blade Material: Shirogami #2 With Carbon Steel Cladding Rust Prone
  • Layer: Single Layer
  • Blade: Single bevelled & Half Tang- Right Bias
  • Handle: WA (Japanese) Handle – Octagonal Spalted Maple
  • Hardness: 62±1 HRC
  • Blacksmith: TSUKASA SUZUKI
  • Blade Finish: Kurouchi finish
  • Location: YAMAGATA, JAPAN

JKC 63 Layer Set of 5

£1,195.00
Hyper Molybdenum Vanadium Stainless steel 63 Layers Blade Hardness 59 HRC + /- 1 Wooden handle Made in Japan

Shoichi SG2 Set of 2

£323.00
SG2 Powder Steel Stainless Steel 3 Layers blade Hardness 64 HRC + /- 1 Laminated hard wood handle Made in Japan

Pateru Kuro Kiritsuke Santoku 180mm

£179.00
  • Handle: WALNUT
  • Blade Material: Shirogami No.2
  • Hardness: 63±1 HRC
  • Layer: 3 Layer
  • Blade: Double bevelled & Half Tang
  • Location: SAKAI, JAPAN
  • Collection: PATERU
  • Blade Finish: Black & Blast finish

MAC KIDS PINK 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

Souryurin Santoku 170mm

£534.00
  • Fully Hand Forged by Master
  • Layers:- 67 Layers Blade
  • Blade Material:- VG10  Core
  • Handle:- Specially shaped polyurethane resin handle
  • Hardness:-  62±
  • Blade Finish:- Hammered and polished
  • One of the Sharpest Edge
  • Made in Japan

Heptagon 3 Layer Set of 3

£385.00
Set includes:- Petty knife 150 mm, Santoku 170 mm and Gyuto 180 mm
  • Steel:           VG2 with Stainless Steel Cladding
  • Handle:       Pakkawood (Heptagonal)
  • Ferrul:         Black Pakka wood
  • Hardness:   58+/-1
  • Layer:          3 Layer
  • Made In:     Seki, Gifu, Japan

Tohoku Santoku 180mm

£719.00
SG2 Powder Steel Three Layer Hardness  63±1 Toishi Wood Handle Made in Japan

Yosegi Coreless Nakiri 160mm

£1,999.00
Fully Hand Forged by Master Blacksmith Masutani san Maker: Ryusen Steel: Coreless VG10 & VG2 Stainless Steel Blade: 128 Layers (Diamond Finish) Handle: Combination of Walnut, Mizuki, Mahogany, Katsura-Jindai, Angsana, Movingui, Japanese Magnolia, Katsura Hardness: 62±

Urushi Aogami Super Santoku 165mm

£249.00
Aogami Super steel Blade core oxidizes 3 Layers blade Urushi Lacquer Wooden handle Hardness 63 HRC + /- 1 Made in Japan

Fukakuryu Maple Santoku 170mm

£449.00
Fully Hande Forged by Master Premium Limited Collection VG10 Damascus Stainless Steel 67 Layers Blade Curly Maple Handle Hardness 60± One of the Sharpest Edge Made in Japan

Hinoura Yusyoku VS2 Santoku 165mm

£1,099.00
Made by a master blacksmith Fully Handmade VS2 Carbon Steel Copper & Brass Multi Layers Hardness 64 HRC + /- 1 Rosewood and water buffalo horn handle

Kyocera Kizuna Ceramic Santoku

£274.00£366.00
Premium Collection Ceramic blade Traditional sand-wave Pattern Pakkawood handle Made in Japan

Miyabi 5000 MCD 67 Maple set of 4 with block

£1,606.00
Premium Complete Set R2 Powder steel blade 133 layers blade CRYODUR ice-hardened Hardness HRC 65+ /- 1 Maple wood handle Steel end-cap & handle mosaic pin Made by MIYABI in Japan

Katayama SG2 Santoku 165mm

£729.00
  • Handle: Ironwood handle W/ Stainless Steel bolster
  • Blade Material: SG2 Powder Steel
  • Hardness: 63±1 HRC
  • Layer: Multi Layer
  • Location: Echizen, JAPAN
  • Blade: Double bevelled & Full Tang
  • Blacksmith: Yuta Katayama
  • Blade Finish: Nickel Damascus finish

Sakon 17 Layer Set of 2

£288.00
VG10 Stainless Steel 17  Layer Hardness 61±1 Black Pakka Wood handle Made in Japan

JKC Limited SG2 Santoku

£324.00£369.00
  • Handle: Ironwood handle with Stainless Steel bolster & mosaic pin
  • Blade Material: SG2 powder Steel
  • Hardness: 64±1 HRC
  • Layer: 3 Layer
  • Blade: Double bevelled & Full Tang
  • Blade Finish: matt finish
  • Made in Japan

Pateru Kuro Santoku 180mm

£189.00
  • Handle: WALNUT
  • Blade Material: Shirogami No.2
  • Hardness: 63±1 HRC
  • Layer: 3 Layer
  • Blade: Double bevelled & Half Tang
  • Location: SAKAI, JAPAN
  • Collection: PATERU
  • Blade Finish: Black & Blast finish

Nigara Hamono SG2 Migaki Santoku 180mm

£269.00
  • Blade Material: SG2 Steel
  • Cladding: Stainless Steel
  • Hardness: 62-63 HRC
  • Grind: Double-edged Blade
  • Hand-forged, hand-grinded, hand-sharpened
  • Tsuchime Blade
  • Handle - Mono Ebony Traditinal Handle
  • Origin- Japan
  • Brand: Nigara Hamono

Naguri Santoku 165mm

£299.00
  • Blade Material: SLD Steel & 13 Chrome Stainless Steel
  • Handle: Wenge, Naguri machining
  • Hardness: 62±1 HRC
  • Layer: 3 Layer
  • Location: Sanjo, JAPAN
  • Blade: Double beveled & Half Tang
  • Blade Finish: Kurochi Nashiji finish

Arai Shiro Santoku

£274.00£279.00
  • Blade Material:- Shirogami 2
  • Layers:- 3  Layers
  • Handle:- D Shape Polished Handle
  • Hardness:- 64±
  • Made in Japan

JKC 63 Layer Set of 3 ( Utility, Santoku & Sujihiki )

£717.00
Hyper Molybdenum Vanadium Stainless steel 63 Layers Blade Hardness 59 HRC + /- 1 Wooden handle Made in Japan

JKC 63 Layer Set of 3 ( Utility, Santoku & Nakiri )

£627.00
Hyper Molybdenum Vanadium Stainless steel 63 Layers Blade Hardness 59 HRC + /- 1 Wooden handle Made in Japan

Senzo T Set of 2

£308.00
  • Handle: White Pakkawood W/ red resin ring Stainless Bolster
  • Blade Material: VG10 Stainless Steel
  • Hardness: 61±1 HRC
  • Layer: 69 Layer
  • Blade: Double bevelled & Half Tang
  • Blade Finish: Polish Damascus finish

Izutsuki Santoku 165mm

£299.00
  • Handle: Morado Handle W/ Brown Pakkawood ferrule
  • Blade Material: Yasuki Shirogami 2
  • Hardness: 62±1 HRC
  • Layer: 23 Layer
  • Blade: Double beveled & Half Tang
  • Location: TOKYO, JAPAN
  • Maker: KIYA HAMONO COMPANY
  • Blade Finish: Matt Damascus Finish

Ryusen Kai Santoku 175mm

£379.00
  • Handle: Burnt Oak Octagonal Wood Handle
  •  Blade Material: VG10 Stainless Steel
  •  Hardness: 61±1 HRC
  •  Layer: 17 Layer
  • Location: SEKI(Blade), SAKAI(Handle)-JAPAN
  • Blade: Double beveled & Half Tang
  •  Collection: PATERU
  • Blade Finish: Damascus & Tsuchime

Marushin Kiritsuke Santoku 180mm

£779.00
  • Handle: South-East Asian Ebony W/ Water Buffalo Horn Ferrule
  •  Blade Material: Yasuki Silver 3
  • Hardness: 63±1 HRC
  • Layer: 3 Layer
  •  Location: TOSA, JAPAN
  • Blade: Double beveled & Half Tang
  • Blade Finish: Mirror finish

MAC KIDS YELLOW 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS ORANGE 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS BLUE 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS GREEN 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC Pro Santoku 170mm

£176.00
  • Blade Material:- MV Steel
  • Layers:-Single Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- Mac Pro
  • Made in Japan

Kiwami Santoku 180mm

£519.00
  • Blade Material:- SG2 Powder Steel, DLC Coating
  • Blade Finish:- Black Finished
  • Layers:- 63 Layer
  • Hardness:- ±64
  • Handle:- A laminated wooden handle with micarta ferrule
  • Made in Japan

Tochi Santoku 180mm

£499.00
  • Steel Type: AUS10 A Stainless steel
  • Layers: 35 Layer
  • Hardness: HRC 61 + /- 1
  • Handle Type: Blue Urushi Lacquer Tochi Wood
  • Blade: Double beveled
  • Made in Japan

JKC 63 Layers (Complete Gift Set)

£1,492.20
The gift Set includes:
  1. Paring 90mm
  2. Utility 120mm
  3. Utility 150mm
  4. Santoku 175mm
  5. Gyuto 210mm
  6. Sujihiki 240mm
  7. 2 Water Wheels Knives Sharpener
  8. 67 Layers handmade Scissors
  9. Knife-Friendly Paulownia Wooden Chopping Board
  10. Knife Storage Magnetic Block
All the knives come in individual boxes

Yosegi Coreless Santoku 170mm

£1,999.00
Fully Hand Forged by Master Blacksmith Masutani san Maker: Ryusen Steel: Coreless VG10 & VG2 Stainless Steel Blade: 128 Layers (Diamond Finish) Handle: Combination of Walnut, Mizuki, Mahogany, Katsura-Jindai, Angsana, Movingui, Japanese Magnolia, Katsura Hardness: 62±

Prever Gyuto

£474.00£569.00
  • Premium Collection
  • Fully Handmade
  • Blade Steel: VG10
  • 67 Layered Nickel Damascus
  • Hardness HRC 60+ /- 1
  • Walnut Wood
  • Made in Japan

Prever Santoku 180mm

£419.00
Premium Collection Fully Handmade Ginsan Steel (Silver paper) 67 Layered Nickel Damascus Hardness HRC 60+ /- 1 Walnut Wood Made in Japan

Kiya 49 Layer Santoku 170mm

£799.00
Premium Collection SG2 Powder steel Stainless steel 49 Layers hand-hammered blade Hardness HRC 62+ /- 1 Cocoboro wood (natural wood) handle Made by the master blacksmith

Aranami coreless Santoku 180mm

£499.00
Premium Collection VG10 & VG2 stainless steel Coreless blade Red Pakka Wood handle (octagnol) Comes in high-class paulownia wood box Made in Japan

Masamune Set of 2

£99.00
Set includes: 1x Utility 135mm 1x Santoku 180mm (multipurpose) Beautiful Wooden handle Blade: Stainless MV steel blade Hardness: 58:60 Handle: Hardwood Handle Maker: Satake Made in Japan

Noushu Chrome (Set of 3)

£79.00
Set includes: 1x Utility 135mm 1x Santoku 180mm (multipurpose) 1x Nakiri 180mm Made in Japan Blade: High Carbon Molybdenum Stainless Steel Hardness: 56:58 Handle: Hardwood traditional Japanese handle Maker: Satake Beautiful Wooden handle Made in Japan

Yasuo Black Santoku 167mm

£169.00
VG10 Stainless Steel 69 Layers thin blade Hardness HRC 60 + /- 1 Pakkawood handle (octagnol) Made in Japan

Yasuo 69 Layers Set of 2

£263.00
VG10 Stainless Steel 69 Layers thin blade Hardness HRC 60 + /- 1 Pakkawood handle Made in Japan Set (Utility 135mm/Gyuto 180mm)

New Tsuchime Gift set of 3 + JAP3 Stand

£133.00
Set Includes: Small Utility: 135mm Santoku: 165mm Nakiri: 170mm JAP3 Stand Fantastic value Stainless steel Made in Japan