Showing 1–96 of 368 results

Kakumei Utility 120mm

£29.00
Blade: Molybdenum Stainless SteelHandle : Black PakkawoodHardness: 57±Made in Japan

MAC KIDS GREEN 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS PINK 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS BLUE 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS ORANGE 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

MAC KIDS YELLOW 125MM

£29.00
  • Handle: Thermoplastic elastomer Resin
  • Blade Material: AUS8
  • Hardness: 58±1
  • Construction: Mono Steel, Roll Forged
  • Location: SAKAI, OSAKA, JAPAN Steel
  • Property: Stainless-Steel
  •  NOTE: Not Dishwasher Safe
  • Brand: MAC
  • Edge Geometry: Double Beveled

Kakumei Small Santoku 135mm

£34.00
Blade: Molybdenum Stainless SteelHandle : Black PakkawoodHardness: 57±Made in Japan

Masamune Black Santoku 170mm

£39.00
  • Steel: High Carbon M/V
  • Blade: Single Layer
  • Handle: ABS resin, TPR
  • Hardness: 58-60 HRC
  • Made in Japan

Masamune Black Gyuto 180mm

£39.00
  • Steel: High Carbon M/V
  • Blade: Single Layer
  • Handle: ABS resin, TPR
  • Hardness: 58-60 HRC
  • Made in Japan

Kakumei Gyuto 180mm

£44.00
Blade: Molybdenum Stainless SteelHandle : Black PakkawoodHardness: 57±Made in Japan

Kakumei Santoku 170mm

£44.00
Blade: Molybdenum Stainless SteelHandle : Black PakkawoodHardness: 57±Made in Japan

Kane MV Gyuto

£49.00£64.00
  • Blade: DSR-1K6 high carbon stainless steel
  • Blade: Double beveled & Half Tang
  • Handle: Laminated wood w/ Plastic bolster
  • Hardness: 59±1 HRC
  • Layer: Single Layer
  • Blade Finish: Tsuchime finish
  • Location: SEKI, JAPAN

Kyocera Shin Black Ceramic Chef’s Santoku Knife

£68.00£86.00
A Santoku knife is a superb addition to any knife set. it’s suitable for preparing meat, fish or vegetables. The

Sakamoto Santoku 165mm

£69.00
Sakamoto Santoku 165mm Note: These blades will oxidise if left damp or wet and should be dried immediately after washing

Kitchen Tools 3 Set

£69.00
Set Include: Santoku Knife Scissors Peeler

Kyocera Gen Black Ceramic Gyuto 180mm

£70.00£78.00
Kyocera Ceramic Gyuto (2 sizes) NOTE: Avoid twisting, dropping and hand wash only.

Brieto 3 Layers Santoku (2 sizes)

£84.00£89.00
3 Layers/ Stainless Steel Molybdenum & Vanadium Hardness HRC 59 + /- 1 Wooden Handle Made in Japan

High Carbon 2 Knives Set + Rust Removing Cream

£84.00
Nakiri (VEG) & Santoku (Multi-Purpose) Shirogami Steel (Carbon Steel) Iron Clad (Whole Blade Rusts) Rust Removing Cream Included Wooden Handle Made in Japan

JKC AUS8 Santoku 167mm

£84.00
AUS8 Stainless steel 3 Layers blade Hardness 59 HRC + /- 1 Pakkawood handle Made in Japan

Saku 69 Layer Santoku 175mm

£84.00
  • Blade: Laminated forged composite steel (69 layers Damascus steel)
  • Handle: ABS Resin
  • Layers: 69 layers
  • Hardness: 61:62
  • Maker: Satake
  • Blade: Double-edge Blade
  •  Made in Japan

MAC Chef Gyuto – Domestic Use

£84.00
  • Blade Material:- MV Steel
  • Layers:- Single  Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- MAC Chef
  • Made in Japan

Brieto 3 Layers Gyuto

£89.00£169.00
3 Layers/ Stainless Steel Molybdenum & Vanadium Hardness HRC 59 + /- 1 Wooden Handle Made in Japan

JKC AUS8 Gyuto 200mm

£89.00
AUS8 Stainless steel 3 Layers blade Hardness 59 HRC + /- 1 Pakkawood handle Made in Japan

Tojiro VG10 NB (Set of 2)

£94.00
1 x Utility 135mm 1 x Santoku 170mm (multipurpose) VG10 Stainless steel blade Three layers blade Wooden handle Made in Japan

Kyocera Shin Black Ceramic Chef’s Knife 180mm

£95.00
This practical Chef’s knife will tackle almost any cutting and slicing task in the kitchen with ease. It’s the perfect

Tojiro DP VG10 Kiritsuke

£98.00£118.00
VG10 stainless steel 3 Layers blade Hardness HRC 60+ /- 1 Reinforced laminated material handle Made in Japan

Best Clad Pro Gyuto

£99.00
180mm and 210mm – Gyuto literally translates as ‘cow sword’ and is the Japanese interpretation of a European chef’s knife.

Kyoto Gyuto

£99.00£109.00
AUS8 Stainless Steel 3 Layers blade Hardness HRC 59+ /- 1 Stainless steel handle Made in Japan

Kyoto Santoku 180mm

£99.00
AUS8 Stainless Steel 3 Layers blade Hardness HRC 59+ /- 1 Stainless steel handle Made in Japan

Kitchen Tools 5 Set

£99.00
Set Include: Santoku Knife Scissors Peeler Measure Spoons set of 2 Tongs

Tojiro DP VG10 Santoku 170mm

£103.00
VG10 stainless steel 3 Layers blade Hardness HRC 60+ /- 1 Reinforced laminated material handle Made in Japan

Tojiro DP VG10 Gyuto

£103.00£237.00
VG10 stainless steel 3 Layers blade Hardness HRC 60+ /- 1 Reinforced laminated material handle Made in Japan

JKC AUS10 Gyuto

£109.00£129.00
AUS10 Stainless steel 3 Layers blade Hardness 60 HRC + /- 1 Wooden Handle Made in Japan

Tsuchime Gift Set of 3 Knives

£109.00
This 3 piece set is forged from a high quality (M/V) stainless steel that is very sharp and easy to resaharpen on the KC 100 Water Wheel sharpener. The knives are made by a commercial knife maker in Japan that only supplies large retailers and Department stores in Japan. |Is made by a very modern factory that uses robots and automated processes to achieve exacting standards expected by Japanese consumers and will compare to any Western made resharpenknife at even twice the price.The Tsuchime finish reduces the adhesion of sticky foods by breaking the vacuum between a smooth surface of the blade and the food being cut.Fantastic value.Knives Sizes:Small Deba: 120mmSantoku: 170mmNakiri: 170mm

Tsuchime Gift Set of 3 Knives (Western handle)

£109.00
Knives Sizes: Small Utility: 135mm Santoku: 165mm Nakiri: 170mm Fantastic value Stainless steel Made in Japan

Murato Classic Santoku 170mm

£109.00

VG-10 three-layer steel: The three-layer steel is easy to sharpen, VG10 steel material is loved by professional chefs. Molybdenum, Vanadium, and Cobalt, which enhance the longevity of the sharpness.

The craftsmen of Tsubame-Sanjo create a hamaguri-shaped edge (a blade with a cross-section that resembles a clam) using the traditional Sharpening method. The gentle curve of the edge reduces the resistance when cutting into food. Its excellent sharpness provides a smooth cut.

A balanced Blade: The weight of the blade and handle are designed to balance the center of gravity in the middle of the knife to optimize the cutting skills of professional chefs, which allows to cut into gristly meat, large vegetables, and hard food with a lighter force.

Handle shape: The handle is narrow at the root and thick at the end, so it is easy to hold and transmit force. 

Blade: VG10 Clad Stainless Steel
Bolster: SUS304 Stainless Steel
Handle: Pakka Wood

Murato Classic Gyuto

£109.00£239.00
Blade: VG10 Clad Stainless Steel Bolster: SUS304 Stainless Steel Handle: Pakka Wood Made in Japan

JKC AUS10 165mm Bunka

£109.00
AUS10 Stainless steel3 Layers bladeHardness 60 HRC + /- 1Wooden HandleMade in Japan

Masamune Nashiji Gift Set

£109.00
Stainless Steel Molybdenum Vanadium Single Layer Hardness HRC 59 + /- 1 Traditinal handle Made in Japan

Tsuchime Traditonal Sushi Gift Set

£109.00
This 3 piece set is forged from a high quality (M/V) stainless steel that is very sharp and easy to resaharpen on the KC 100 Water Wheel sharpener. The knives are made by a commercial knife maker in Japan that only supplies large retailers and Department stores in Japan. |Is made by a very modern factory that uses robots and automated processes to achieve exacting standards expected by Japanese consumers and will compare to any Western made knife at even twice the price. The Tsuchime finish reduces the adhesion of sticky foods by breaking the vacuum between a smooth surface of the blade and the food being cut. Fantastic value.

Tojiro Hammered Gyuto

£110.00£160.00
VG10 stainless steel 3 Layers blade Hardness HRC 60+ /- 1 Traditional Magnolia handle Made in Japan

Kyocera Ceramic Knives (Set of 3)

£114.00
Kyocera Ceramic Knives Gift Set Chef’s Santoku 140mm Utility Knife 115mm Paring Knife 75mm        Dish Washer Safe

Senzo 69 Layer Small Santoku 143mm

£119.00
VG10 stainless steel 69 Layers blade Hardness HRC 60+ /- 1 Pakkwood traditional handle Made in Japan

Kitchen Tools 7 Set

£119.00
Set Include: Santoku Knife Scissors Peeler Measure Spoons set of 2 Nylon Beater/ Turner Ladle for Kids Tongs

MAC Chef Gyuto

£123.00£155.00
  • Blade Material:- MV Steel
  • Layers:- Single Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- MAC Chef
  • Made in Japan

MAC Chef Set of 2

£123.00
  • Blade Material:- MV Steel
  • Layers:- Single  Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- MAC Chef
  • Made in Japan

Warikome Santoku 165mm

£129.00
VG10 stainless steel 3 Layers blade Hardness HRC 61+ /- 1 Pakkawood handle Made in Japan

JKC Blue 2 Santoku 185mm

£129.00
Aogami No. 2 Steel Core Material Oxidizes 3 Layers Blade Hardness 62 HRC + /- 1 Made in Japan

Senzo 69 Layer Mini Chef 100mm

£129.00
VG10 stainless steel 69 Layers blade Hardness HRC 60+ /- 1 Pakkwood traditional handle Made in Japan

Laguiole Traditional Steak Knives Set of 6 (Brown)

£129.00
- Design by Laguiole Production cutlery
- Steak knives suitable for cutting all types of meat
- Tempered stainless steel blade
- Wooden
handle - Available in 2 colors

Laguiole Traditional Steak Knives Set of 6 (Black)

£129.00
Design by Laguiole Production cutlery
- Steak knives suitable for cutting all types of meat
- Tempered stainless steel blade
- Wooden
handle - Available in 2 colors

Miki Aogami Super Santoku 180mm

£129.00

Aogami Super steel
Blade core oxidizes
3 Layers blade
Pakka wood handle
Hardness 63 HRC + /- 1
Made in Japan

Miki Aogami Super Gyuto

£129.00£189.00

Aogami Super steel
Blade core oxidizes
3 Layers blade
Pakka wood handle
Hardness 63 HRC + /- 1
Made in Japan

Tsune VG1 Brown Gyuto 180mm

£129.00
Blade Material: VG1 stainless steelMaker: TsunehisaLocation: JapanBlade: 3-LayerHardness: 59±Handle: Brown Pakka Wood HandleBolster: Stainless steel Bolster

Kyocera Shin Black Ceramic Knives (Set of 2)

£130.00
Kyocera Shin Black Ceramic Knives Gift Set Chef’s Santoku 160mm Utility Knife 110mm Attractive gift box Tip: This knife is

Suisin Inox Gyuto

£134.00£184.00
AUS8 Stainless Steel Single Layer Hardness HRC 58 + /- 1 Birch Tree Composite Made in Japan

MAC Chef Gyuto With Dimple

£134.00£148.00
  • Blade Material:- MV Steel
  • Layers:- Single Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- MAC Chef
  • Made in Japan

MAC Chef Set Of 2

£135.00
  • Blade Material:- MV Steel
  • Layers:- Single  Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- MAC Chef
  • Made in Japan

JKC Blue 2 Gyuto 200G

£139.00
Aogami No. 2 Steel Core Material Oxidizes 3 Layers Blade Hardness 62 HRC + /- 1 Made in Japan

Kunio 17 Layers VG10 Santoku 165mm

£139.00
VG10 Stainless Steel 17 Layers Blade Hardness HRC 60+ /- 1 Wooden handle Made in Japan

Pateru Traditional Santoku

£139.00£159.00
  • Handle: WA (Japanese) Handle – Magnolia
  • Blade Material: Shirogami #2 With Carbon Steel Cladding Rust Prone
  • Hardness: 62±1 HRC
  • Layer: 2 layers
  • Blade: Double& single beveled & Half Tang
  • Made in  JAPAN
  • Blade Finish: Matt finish
  • BRAND: PATERU

Misono Handmade Santoku

£144.00£149.00
Molybdenum Vanadium steel Single-layer blade Hardness HRC 60+ /- 1 Laminated hardwood handle Made in Japan

JKC High Carbon Gyuto

£144.00
Virgin Carbon Steel Blade Oxidizes Single Layer Blade Hardness 62 HRC + /- 1 Made in Japan

Brieto Granton Santoku 175mm

£144.00
Stainless Steel Molybdenum Vanadium Single Layer Hardness HRC 60 + /- 1 Made in Japan

Brieto Granton Gyuto

£144.00£194.00
Stainless Steel Molybdenum Vanadium Single Layer Hardness HRC 60 + /- 1 Made in Japan

Pateru 10A Santoku 165mm

£144.00
  • Blade Material: AUS-10 Stainless Steel
  •  Hardness: 60±1 HRC
  •  Layer: 69 layers
  • Blade: Double bevelled & Half Tang
  • Blade Finish: Hammer finish
  •  Handle: WA (Japanese) Handle – Clear Oak Tree wood
  •  BRAND: PATERU
  •  Made in Japan

Tojiro VG10 NB (Set of 3)

£145.00
1x Utility 135mm 1x Nakiri 160mm 1x Santoku 170mm (multipurpose) VG10 Stainless steel blade Three layers blade Wooden handle Made in Japan

Miyako 33 Layers Santoku

£149.00£179.00
AUS8 Stainless steel 33 layers blade Hardness HRC 60 + /- 1 D shape wooden handle Made in Japan

Keyaki Shiro 3 Santoku 165mm

£149.00
Shirogami No. 2 Blade oxidize 3 Layers blade Hardness HRC 62+ /- 1 Wooden handle Made in Japan

Keyaki Shiro 3 Funayuki 180mm

£149.00
Shirogami No. 2 Blade oxidize 3 Layers blade Hardness HRC 62+ /- 1 Wooden handle Made in Japan

Miyako 33 Layers Bunka

£149.00£179.00
AUS8 Stainless steel 33 layers blade Hardness HRC 60 + /- 1 D shape wooden handle Made in Japan 

Yasuo 69 Layers Gyuto

£154.00£174.00
VG10 Stainless Steel 69 Layers thin blade Hardness HRC 60 + /- 1 Pakkawood handle Made in Japan

Tamahagane 35 Layers Santoku

£154.00£164.00
VG10 stainless steel 35 Layers blade Hardness HRC 60+ /- 1 Hardwood handle Made in Japan

Tamahagane 35 Layers Gyuto

£154.00£269.00
VG10 stainless steel 35 Layers blade Hardness HRC 60+ /- 1 Hardwood handle Made in Japan

Heptagone 3 Layer Santoku 170mm

£154.00
Steel: VG2 Stainless Steel with Stainless Steel CladdingHandle: Wa (Japanese) Handle - Pakkawood (Heptagonal)Ferrul: Black Pakka woodHardness: 57–59Layer: 3 LayerMade In: Seki, Gifu, Japan

Tojiro Gai Gyuto 180mm

£159.00
VG10 stainless steel 37 Layers blade Made in Japan

Keyaki Shiro 3 Bunka 170mm

£159.00
Shirogami No. 2 Blade oxidize 3 Layers blade Hardness HRC 62+ /- 1 Wooden handle Made in Japan

Sakon 17 Layer Gyuto

£159.00
VG10 Stainless Steel17  LayerHardness 61±1Black Pakka Wood handleMade in Japan

Sakon 17 Layer Santoku 180mm

£159.00
VG10 Stainless Steel17  LayerHardness 61±1Black Pakka Wood handleMade in Japan

Senzo 69 Layer Santoku 165mm

£164.00
VG10 stainless steel 69 Layers blade Hardness HRC 60+ /- 1 Pakkwood traditional handle Made in Japan

Heptagone 3 Layer Gyuto 200mm

£164.00
Steel: VG2 Stainless Steel with Stainless Steel CladdingHandle: Wa (Japanese) Handle - Pakkawood (Heptagonal)Ferrul: Black Pakka woodHardness: 57–59Layer: 3 LayerMade In: Seki, Gifu, Japan

Senzo 69 Gyuto

£169.00£199.00
VG10 stainless steel 69 Layers blade Hardness HRC 60+ /- 1 Pakkwood traditional handle Made in Japan

Yasuo Black Bunka

£169.00£179.00
VG10 Stainless Steel 69 Layers thin blade Hardness HRC 60 + /- 1 Pakkawood handle (octagnol) Made in Japan

Nagomi 33 Santoku 185mm

£174.00
Nagomi 33 Layers molybdeum and vanadium steel

Yoshida Aogami Funayuki 175mm

£174.00
Steel: Aogami 2Blade core oxidizes3 Layers bladeHardness: 60:62 HRCHandle Japanese Octagonal WAMaterial: Maple with Laminated Hardwood FerruleMaker: Yoshida HamonoHot Forged by Hand

MAC Pro Santoku 170mm

£176.00
  • Blade Material:- MV Steel
  • Layers:-Single Layer
  • Hardness:- ±60
  • Handle:- Black Pakkawood
  • Collection:- Mac Pro
  • Made in Japan

Miyako 33 Layers Gyuto

£179.00£189.00
AUS8 Stainless steel 33 layers blade Hardness HRC 60 + /- 1 D shape wooden handle Made in Japan